...
5. The Setup Wizard opens, and you can enter basic network and deployment settings. Determine how you want to deploy the appliance, and use the following worksheets to note the network settings that you want to enter on the wizard screens. If you are configuring an HA pair, you must configure each node individually.
Settings | Enter your information here | |
Grid Name Shared Secret Host Name Grid Master's IP Address |
| |
LAN1 Port IP Address and Netmask Gateway IP Address *Port Settings | ||
**Admin Password | ||
**Local Date, Time, and Time Zone or NTP Server IP Address |
...
Use the following worksheet when configuring an independent HA pair:
Settings | Enter your information here |
System Name Shared Secret Host Name | |
Virtual Router ID VIP (Virtual IP) Address and Netmask Node 1: HA Port IP Address Node 2: HA Port IP Address Node 1: LAN1 IP Address Node 2: LAN1 IP Address Gateway IP Address | |
Admin Password | |
Local Date, Time and Time Zone or NTP Server IP Address |
On the last screen of the wizard, click Finish. The Grid Manager application restarts. If you configured an HA pair, use the VIP address when you make an HTTPS connection to the HA pair.