An Infoblox appliance has several types of ports on its front panel:
...
Figure 4 describes DB-9 and RJ-45 Ethernet connector pin assignments. DB-9 pin assignments follow the EIA232 standard. To make a serial connection from your management system to the console port, you can use an RJ-45 rollover cable and two female RJ-45-to-female DB-9 adapters, or a female DB-9-to-female DB-9 null modem cable.
The RJ-45 pin assignments follow IEEE 802.3 specifications. All Infoblox Ethernet ports are auto-sensing and automatically adjust to standard straight-through and cross-over ethernet cables.
| Anchor | ||||
|---|---|---|---|---|
|
Male DB-9 Console Port
DB-9 Connector Pin Assignments
Pin | Signal | Direction |
1 | (not used) |
|
2 | Receive | Input |
3 | Transmit | Output |
4 | DTE Ready | Output |
5 | Ground | — |
6 | DCE Ready | Input |
7 | RTS (Request to Send) | Output |
8 | CTS (Clear to Send) | Output |
9 | (not used) |
|
...
Pin | 10Base-T 100Base-T Signal | 1000Base-T Signal | T568A | T568B |
1 | Transmit + | BI_DA+ | White/Green | White/Orange |
2 | Transmit - | BI_DA- | Green | Orange |
3 | Receive + | BI_DB+ | White/Orange | White/Green |
4 | (not used) | BI_DC+ | Blue | Blue |
5 | (not used) | BI_DC- | White/Blue | White/Blue |
6 | Receive - | BI_DB- | Orange | Green |
7 | (not used) | BI_DD+ | White/Brown | White/Brown |
8 | (not used) | BI_DD- | Brown | Brown |
LinkActivity
8 7 6 5 4 3 2 1
(Looking into RJ-45 Ethernet ports on an Infoblox appliance)
Legend: BI_D = bidirectional; A, B, C, D = wire pairings 
For 1000Base-T connections, all four twisted-pair wires are used for bidirectional traffic.
| Anchor | ||||
|---|---|---|---|---|
|
The PT-2200 appliance ships with dual AC power supplies and five fan modules. The power supplies and fan modules are field replaceable. The power supplies are also hot-swappable so you can replace either at a time without disrupting the operations of the appliance.
Figure 5 PT-2200, Rear View UID LED
Power Supply 2
Fan Module 5 Fan Module 4 Fan Module 3 Fan Module 2
UID Button Fan Module 1
Power Supply 1
Power Outlets 
Table 2RearPanel Components
| Component | Description |
|---|---|
| Fan |
...
| Modules | Five field replaceable fan modules to help maintain optimum operating temperature. |
...
Each fan has an air vent that allows warm air to flow out of the appliance. Do not obstruct. |
| UID |
...
| LED | Blue = UID is activated through pressing the UID button on the appliance or through the Infoblox GUI or CLI command Dark = UID is deactivated Note: When UID is activated, the LCD on the front panel blinks at the same time. |
|
...
Button | The unit identification button. When you press the UID button, the LCD panel on the front panel blinks and the UID LED on the rear panel glows blue. In a rack environment, the UID feature enables easier location of a server when moving between the front and rear of the rack. You can also identify the appliance through the Infoblox GUI and CLI command. |
| Power |
...
| Supplies | Each of the two redundant power supplies has a three-prong power outlet for connecting the appliance to a standard AC (Alternating Current) power source. |