...
3. From the On-Prem Hosts page (Manage > On-Prem Hosts), perform a search in the search field on the IP address to locate any on-prem host(s) already associated with the IP space. If an on-prem host is not yet associated with the IP space, you will have to associate the on-prem host with the IP space by selecting the on-prem host and editing it. If an on-prem host is not associated with the IP space, then the configuration will not work within the security policy. When the Edit BloxOne Container dialogue appears, in the IP Space field, select the chosen IP space from among the list of on-prem host options from which to associate with the IP Space you have previously selected.
4. Once an IP space has been associated with the on-prem host, click Save & Close to save the configuration.
5. Next, go to Policies > Security Policies to create the security policy to be associated with the security policy and with the chosen address block.
6. In the Nework Network Scope section of the Create New Policy dialogue, click Add Source and select IPAM from among the drop-down menu choices.
7. On the Manage IPAM page, locate your chosen IP space and select it. From the listed IPAM objects on the page, select those IPAM object(s) you want to be associated with it (in this case, the IP address block). Once you have made your selections, click Add followed by Save to save the configuration. For more information about IPAM, see DHCP in the Infoblox BloxOne DDI documentation.
8. For each source you have added, click Add. The source appears in the table. You can click the Add Source menu again to choose another source for your network scope.
9. After you define your network scope, you can proceed to add policy rules, set precedence order and bypass codes.
10. Click Next in the wizard to define policy rules. For more information, see Adding Policy Rules and Setting Policy Precedence.
...