...
FXXudk8ZEVICQOeRS4lRrF/jAgMBAAGgPjA8BgkqhkiG9w0BCQ4xLzAtMAkGA1Ud----END CERTIFICATE REQUEST-----
When you receive the CA-signed certificate, upload it to the appliance and activate it. Note that the certificate must be in PEM format and the file must have a .crt extension.
6. In On the Settings icon –> icon > General Settings –> > Security page, click the NetMRI HTTPS Settings tab.
...
To enable or disable the HTTP and HTTPS modes, perform the following:
- Go to to the Settings –> icon > General Settings –> > Security.
- Click the Net MRI HTTPS Settings tab.
- Select Enable HTTP for the Net MRI Interface, Enable HTTPS for the NetMRI Interface, or both.
...
You can define the default SNMP protocol settings that are used by NetMRI. To configure SNMP settings for the appliance, complete the following:
- Go to the Settings icon –> icon > General Settings –> > Security page and click the SNMP Settings tab.
- Enable or disable Version 1/2c. If enabled, enter a Community String.
- Enable or disable Version 3. If enabled, enter an SNMPv3 Passphrase.
- Click Update.
...
You can define the default SSH protocol settings that are used by NetMRI. To configure SSH settings for the appliance, complete the following:
- Go to the Settings icon –> icon > General Settings –> > Security page and click the SSH Settings tab.
- Configure settings to be used when NetMRI connects to network devices for configuration collection or Configuration Command Script execution (you must enable at least one protocol).
- Enable or disable SSH v1 Client Status. If enabled, select an SSH v1 Client Cipher.
- Enable or disable SSHv 2 Client Status. If enabled, click, CTRL+click or SHIFT+click to select SSH v2 Client Ciphers.
...
To install a CA certificate, perform the following:
- Go to the Settings icon –> icon > General Settings –> > Security page and click the CA Certificates tab.
- Click Import.
- In the pop-up window, enter a logical name for the new certificate.
- Click Browse to locate the certificate file.
- Click Import to import the CA certificate to NetMRI. The certificate is added to the appliance. The newly imported CA Certificate will appear in the table in the CA Certificates tab after the import is complete.
...
- You have selected the Root CA certificate as the default Certificate Authority.
- You have issued a Key Ring certificate request signed by this Certificate Authority.
- The APIC Key Ring certificate has been created.
- In the APIC GUI, select Fabric -> > Fabric Policies -> > Pod Policies -> Policies -> > Policies > Management Access -> > default.
- Make sure that the Admin Key Ring and Oper Key Ring correspond to the one created in step 3. Now you can upload the Root CA certificate in the NetMRI security settings.
...
- You have selected the certificate chain as the default Certificate Authority. This certificate chain must include at least one Intermediate or Root CA certificate.
- You have issued a Key Ring certificate request signed by this Certificate Authority.
- The APIC Key Ring certificate has been created.
- In the APIC GUI, select Fabric -> > Fabric Policies -> > Pod Policies -> Policies -> > Policies > Management Access -> > default.
- Make sure that the Admin Key Ring and Oper Key Ring correspond to the one created in step 3. Now you can upload the certificate chain in the NetMRI security settings.
...