...
Under Routing Distance, the values used by NetMRI reflect the Cisco-defined default values. You can change these values for the local NetMRI appliance or Operations Center system. Changing these values only affects the local NetMRI appliance’s calculations for Path Analysis if the appliance is one of the endpoints or an intermediate node in a path being calculated.
To edit change the administrative distance:
...
In a large network, more than one possible path may exist between two devices. You can control the number of path calculations performed for the same Source/Destination pair. The default number of simultaneous path calculations is 2 with a maximum value of 10.
To edit change the number of calculated paths:
- Go to the Settings icon > General Settings > Path Analysis.
- In the corresponding field, select the number of calculated paths. Avoid setting this value to too high a number, as multiple active path calculations can affect performance.
- Click Save.
- In the Confirm dialog box, click Yes.