Use the benchmark command to run the benchmark tool or display the benchmark results.
Syntax
The benchmark run command executes following is the command syntax:
benchmark [ run | show ]
The following table describes the subcommand of the benchmark command.
| Subcommand | Description |
|---|---|
run | Executes the Infoblox Benchmark tool to test the hardware performance of your NetMRI VM. |
show | Displays the benchmark results for the NetMRI VM |
...
| performance in terms of device count. |
Examples
The following is the output of the benchmark run command:
SA-4-100> benchmark run
Do you want to run the benchmark on the next boot? (y or n): y
***************************************************************************
The benchmarking is a long-running process and can take up to 1 hour.
During this process system will respond only to pings, the CLI and UI
will be unavailable. Please be patient.
***************************************************************************
Do you want to reboot right now? (y or n): n
The benchmark tool will be launched on the next boot.
SA-4-100>
The following is the output of the benchmark show command:
SA-4-100> benchmark show
Device Capacity (the benchmark was executed on 2020-03-09 03:07:47.939190)Current compatibility mode: Operations Center---------------------------+----------------------+------------------------Calculated Based On | Standalone/Collector | Operations Center---------------------------+----------------------+----+-------------------CPU (40 cores, 67883 MIPS) | 3650 | 18600Storage (30061 IOPS) | 5000+ | 20000+
RAM (205 Gb) | 5000+ | 20000+---------------------------+----------------------+------------------------Result | 3650 | 18600