Page Comparison

...

• ASN: Enter a value from 1 to 4294967295.

• Router ID: Enter a valid IP address.

• In the ADDRESS FAMILY section, specify the following:

  • IPv4:

    • ADMIN DISTANCE:

      • External: This is optional. The range is 1 to 255.

      • Internal: This is optional. The range is 1 to 255.

      • Local: This is optional. The range is 1 to 255.

    • Maximum Paths eBGP: This is optional. The range is 1 to 64.

    • Maximum Paths iBGP: This is optional. The range is 1 to 64.

    • AGGREGATE ADDRESSES:

      1. Click Add.

      2. In the ADDRESS/CIDR column, specify a valid IPv4 prefix.

      3. In the OPTIONS column, select Summary Only, AS-Set, or both.

  • IPv6:

    • ADMIN DISTANCE:

      • External: This is optional. The range is 1 to 255.

      • Internal: This is optional. The range is 1 to 255.

      • Local: This is optional. The range is 1 to 255.

    • Maximum Paths eBGP: This is optional. The range is 1 to 64.

    • Maximum Paths iBGP: This is optional. The range is 1 to 64.

  In the

  • • AGGREGATE ADDRESSES

  section, do the following (optional)

  • • :

      1. Click Add.

      2. In the ADDRESS/CIDR column, specify a valid

    IPv4 or

    • 1. IPv6 prefix.

      2. In the OPTIONS column, select Summary Only, AS-Set, or both.

• In the INJECT ROUTES section, do the following (optional):

  • Click Add.

  • In the IP ADDRESSES column, specify a valid IPv4 or IPv6 prefix.

• In the ADVANCED section, expand the Advanced Options drop-down and specify the following:

• Fast External Failover: By default, this option is set to Disabled.

• Graceful Restart: By default, this option is set to Disabled.

• Graceful Shutdown: By default, this option is set to Disabled.

• Log Neighbor Changes: By default, this option is set to Disabled.

• Hold Time: By default, this option is set to Disabled.

• Keep Alive: By default, this option is set to Disabled.

• Update Delay: By default, this option is set to Disabled.

...