...
Caution: If you specify an address or network other than the one from which you are currently accessing the appliance, when you save your configuration, you will lose your administrative session and be unable to reconnect. If you have enabled the Enable GUI/API Access via both MGMT and LAN1/VIP feature and configured ACLs to control access to the GUI and API, then the same set of ACLs are applicable on both the interfaces (LAN1 and MGMT port). For information, see Enabling GUI and API Access on the MGMT and LAN1/VIP Ports and Configuring Security Features .
...
| Anchor |
|---|
| Enabling HTTP Redirection |
|---|
| Enabling HTTP Redirection |
|---|
|
Enabling HTTP ...
Redire
ctionYou can enable the NIOS appliance to redirect administrative connection requests using HTTP to the secure HTTPS protocol. When you disable redirection, the NIOS appliance ignores any administrative connection requests not using HTTPS. By default, the NIOS appliance does not redirect HTTP connection requests to HTTPS. When you change this setting, the application restarts and your management session terminates.
...
You can set the length of idle time before an administrative administ
rative session to the Infoblox GUI times out. The default timeout value is 600 seconds (10 minutes).
If a user does not interact with the application for the specified time, the appliance displays a message that a timeout has occurred. Click
OK to restart the GUI session.
Note that the session timeout is not honored when the Infoblox GUI supports auto-refresh. This means that the Infobox interface page is automatically refreshed even after you have set the session timeout value. ...
Note: If you change the session timeout value, the new setting takes effect only after you log out and log back in.
...
| Anchor |
|---|
| Disabling the LCD Input Buttons |
|---|
| Disabling the LCD Input Buttons |
|---|
|
Disabling the LCD Input Button
s
...
