Depending on your deployment and configuration choices,
| Anchor | ||||
|---|---|---|---|---|
|
...
VLANs and VLAN tagging are supported on both IPv4 and IPv6 transports. This feature is currently supported on the following Infoblox appliances: Trinzic 1410, 1415, 1420, 1425, 2210, 2215, 2220, 2225, Infoblox-4010,
Infoblox-4030-Rev1, Infoblox-4030-Rev2, Infoblox-4030-10G, PT-1400, PT-1405, PT-2200, PT-2205, PT-4000, and
PT-4000-10GE, TE-1410, TE-1420, TE-1415, and TE-1425. VLAN tagging is not supported on TE-100, TE-810, TE-815, TE-820, and TE-825. For more information about VLAN support for an Infoblox-4030 appliance, refer to the DNS Cache Acceleration Application Guide. For information about these appliances, refer to the respective installation guides on the Infoblox Support web site at http://www.infoblox.com/support.
Currently, only the DNS service can listen on specific VLAN interfaces. The DHCP service listens only on the primary VLAN interface (tagged or untagged). However, if the primary VLAN interface is untagged, DHCP will serve all VLANs on that interface because an untagged primary VLAN receives all broadcast packets. You can also specify VLANs as the source port for sending DNS queries and notify messages. For information about how to configure these, see Specifying Port Settings for DNS.
Additional VLAN support is available exclusively for discovery on the following Network Insight appliances: ND-1400, ND-1405, ND-2200, ND-2205, ND-4000, ND-V1400, ND-V1405, ND-V2200, and ND-V2205. Binding other services on
the VLAN interfaces of the Network Insight appliances is not supported.
...