...
Note: For effective use of seed routers, provide SNMP credentials to the Probe member to allow it to pull the key routing and connectivity information, including the IPv6 routing table and the local Neighbor Discovery Cache, from the device. For more information, see Defining Seed Routers for Probe Members.
...
Configuring Cisco Application Policy Infrastructure Controller (APIC)
To configure Cisco APIC on NIOS, complete the following:
- From the Grid tab, select the Grid Manager tab, and then click Discovery.
- Select the member check box, and then click Edit –> Member Discovery Properties in the Toolbar.
- Click the Cisco APIC Configuration tab and click the Add icon and complete the following:
- Address: Enter the hostname or IP address of Cisco APIC.
- Protocol: Select HTTP or HTTPS as the protocol. When you select HTTPS, you must upload the corresponding SSL CA certificate to the Grid in order for NIOS to communicate with Cisco APIC, as described in Managing Certificates on page 63.
- Network View: Select the network view to which the device is associated.
- Username: The login name of Cisco APIC.
- Password: The login password of Cisco APIC.
- Comment: Enter additional information Cisco APIC.
- Click Add to add Cisco APIC.
- When finished, click Save & Close.