...
The TOE reboots and goes through boot time self tests. If the test fails, the TOE goes into a loop and displays an error message on the serial console and the LCD. Otherwise, it displays the Login prompt after the self tests.
To clear Common Criteria mode on an appliance, log in to the Infoblox CLI and execute the command: reset all.
| Anchor | ||||
|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
Only superusers can access the CLI. To ensure security, access to the CLI is permitted through a direct console connection only. Note that activating the option Enable Remote Console Access in the Grid or Member Properties editor will result in a non-compliant system.
To access the Infoblox CLI through the console port:
...
admin infoblox
Note: After you log in, change the default user name and password of the default superuser admin to prevent unauthorized access to the TOE. For more information on changing passwords, see Changing the Password and Email Address .
For more information about the Infoblox CLI, refer to the Infoblox CLI Guide.
1856NIOS Administrator Guide (Rev. A)NIOS 8.1
Licenses and Services