...

1. At HQ and Site 1, connect Ethernet cables from the LAN1 and HA ports on the appliances in each HA pair to a switch, connect the appliances to power sources, and turn on the power for each appliance.
   

   ---

   Note: When connecting the nodes of an HA pair to a power source, connect each node to a different power source if possible. If one power source fails, the other might still be operative.
   

   ---

2. At Site 2, connect an Ethernet cable from the LAN1 port on the single appliance to a switch, connect the appliance to a power source, and turn on the power for that appliance.

Anchor
Create the Grid Master Create the Grid Master

Anchor
bookmark657 bookmark657

Create the Grid Master

...

Note: IPv6 addressing is fully supported on Infoblox Grid Masters, HA pairs and standalone HA pairs and appliances.
Examples in the sections of this chapter use IPv4.

...

Configure two appliances at HQ to be the two nodes that make up the HA pair forming the Grid Master.

Grid Master – Node 1

1. By using the LCD or by making a console connection to the appliance that you want to make Node 1 of the HA pair for the Grid Master, change the default network settings of its LAN1 port to the following:
   • IP Address: 10.0.1.6
   • Netmask: 255.255.255.0
   • Gateway: 10.0.1.1
2. Connect your management system to the HQ network, open a browser window, and connect to https://10.0.1.6.
3. Log in using the default user name and password admin and infoblox.
4. Review the End-User License Agreement and click I Accept. The Grid Setup Wizard appears.
5. On the first screen, select Configure a Grid Master and click Next.
6. Specify the Grid properties:
   • Grid Name: Enter corpxyz.
   • Shared Secret: Enter Mg1kW17d.
   • Confirm Shared Secret: Enter Mg1kW17d.
   • Hostname: Enter ns1.corpxyz.com.
   • Type of Network Connectivity: Select IPv4 from the drop-down list.
   • Is the Grid Master an HA pair?: Select Yes.
7. Specify the network properties and click Next:
   • Virtual Router ID: Enter 143.
   • Required Ports and Addresses: Enter the following to set up the HA pair:

...

When you click Finish, the Infoblox GUI application restarts.

Grid Master – Node 2

1. By using the LCD or by making a console connection to the appliance that you want to make Node 2 of the HA pair for the Grid Master, change the default network settings of its LAN1 port to the following:
   • IP Address: 10.0.1.8
   • Netmask: 255.255.255.0
   • Gateway: 10.0.1.1
2. In the login window, type 10.0.1.8 in the Hostname field.
3. Log in using the default user name and password admin and infoblox.
4. From the Grid tab, select the Grid Manager tab -> Members tab -> member check box.
5. Expand the Toolbar and click Join Grid and specify the following:
   • Virtual IP of Grid Master: 10.0.1.10.
   • Grid Name: Enter corpxyz.
   • Grid Shared Secret: Enter Mg1kW17d.
6. Confirm the configuration, and then on the last screen of the wizard, click Finish. The HTTPS session terminates, but the login window remains open.
7. In the login window, type 10.0.1.10 (the VIP address for the Grid Master) in the Hostname field.
8. Log in using the default user name admin and the password 1n85w2IF.
9. To check the status of the two nodes of the HA Grid Master, navigate to the Grid tab, select the Grid Manager -> Members tab. This panel lists the Grid members. Check the icon in the Status column of the Grid Master. (green = the appliance has joined the Grid and is functioning properly; yellow = the appliance is in the process of joining the Grid; red = the appliance has not joined the Grid). You can also use the CLI command set network to join an appliance to a Grid. Check that the status indicators are all green in the Detailed Status panel.

...

Note: Depending on the network connection speed and the amount of data that the master needs to synchronize with the member, the process can take from several seconds to several minutes to complete.

...

Anchor
Define Members on the Grid Master Define Members on the Grid Master

Anchor
bookmark658 bookmark658

Define Members on the Grid Master

Before logging in to and configuring the individual appliances that you want to add to the Grid, define them first on the Grid Master. You can configure a Grid member in IPv4, IPv6, or a dual mode (IPv4 and IPv6), but the configuration example uses IPv4 addresses.

HQ Site – HA Member

1. From the Grid tab, select the Grid Manager -> Members tab.
2. Expand the Toolbar and click Add -> Add Grid Member.
3. In the Add Grid Member wizard, complete the following and click Next:
   • Member Type: Select Infoblox.
   • Host Name: Enter ns2.corpxyz.com.
   • Comment: Enter HQ Site - ns2.corpxyz.com.
4. Enter the following information about the member that you are adding to the Grid and click Save & Close:
   • Type of Network Connectivity: Select IPv4 from the drop-down list.
   • High Availability Pair: Select this option.
   • Virtual Router ID: 210
   • Required Ports and Addresses:

Site 1 – HA Member

1. From the Grid tab, select the Grid Manager tab -> Members tab.
2. Expand the Toolbar and click Add -> Add Grid Member.
3. In the Add Grid Member wizard, enter the following and click Next:
   • Member Type: Select Infoblox.
   • Host Name: Enter ns3.site1.corpxyz.com
   • Comment: Enter Site 1 - ns3.site1.corpxyz.com
4. Specify the following information about the member that you are adding to the Grid and click Save & Close:
   • Type of Network Connectivity: Select IPv4 from the drop-down list.
   • High Availability Pair: Select this option.
   • Virtual Router ID: Enter 111.
   • Required Ports and Addresses:

...

1. From the Grid tab, select the Grid Manager -> Members tab.
2. Expand the Toolbar and click Add -> Add Grid Member.
3. In the Add Grid Member wizard, enter the following and click Next:
   • Member Type: Select Infoblox.
   • Host Name: ns4.site2.corpxyz.com
   • Comment: Site 2- ns4.site2.corpxyz.com
4. Specify the following information about the member that you are adding to the Grid and click Next:
   • Type of Network Connectivity: Select IPv4 from the drop-down list.
   • Standalone Member: Select this option.
   • Required Ports and Addresses: Click the empty fields and enter the following information:
     • Address: Enter 10.2.1.10.
     • Subnet Mask (IPv4) or Prefix Length (IPv6): Enter 255.255.255.0.
     • Gateway: Enter 10.2.1.1.
     • Port Settings: Select AUTOMATIC.
5. Save the configuration and click Restart if it appears at the top of the screen.
6. Log out from the Grid Master.

Anchor
Join Appliances to the Grid Join Appliances to the Grid

Anchor
bookmark659 bookmark659

Join Appliances to the Grid

To complete the process of adding appliances to the Grid, log in to and configure each individual appliance so that it can contact the Grid Master.

HQ Site – HA Grid Member (Node 1)

Make a console connection to the appliance that you want to make Node 1 in the HA pair, and enter the following:
Infoblox > set network
NOTICE: All HA configuration is performed from the GUI. This interface is used only to configure a standalone node or to join a Grid.
Enter IP address: 10.0.2.6
Enter netmask : 255.255.255.0
Enter gateway address : 10.0.2.1
Configure IPv6 network settings? (y or n):n Become Grid member? (y or n): y
Enter Grid Master VIP: 10.0.1.10
Enter Grid Name: corpxyz
Enter Grid Shared Secret: Mg1kW17d
New Network Settings: IP address: 10.0.2.6
Netmask: 255.255.255.0
Gateway address: 10.0.2.1
Join Grid as member with attributes: Grid Master VIP: 10.0.1.10
Grid Name: corpxyz
Grid Shared Secret: Mg1kW17d
WARNING: Joining a Grid will replace all the data on this node!
Is this correct? (y or n): y
Are you sure? (y or n): y
The Infoblox application restarts. After restarting, the appliance contacts the Grid Master and joins the Grid as Node 1.

HQ Site – HA Member (Node 2)

Make a console connection to the appliance that you want to make Node 2 in the HA pair, and enter exactly the same data you entered for Node 1 except that the IP address is 10.0.2.8.
After the application restarts, the appliance contacts the Grid Master and joins the Grid as Node 2, completing the HA member configuration for the HQ site.

Site 1 – HA Grid Member (Node 1)

Make a console connection to the appliance that you want to make Node 1 in the HA pair at Site 1, and use the set network command to configure its basic network and Grid settings. Use the following data:

...

The Infoblox application restarts. After restarting, the appliance contacts the Grid Master and joins the Grid as Node 1.

Site 1 – HA Grid Member (Node 2)

Make a console connection to the appliance that you want to make Node 2 in the HA pair at Site 1, and enter exactly the same data you entered for Node 1 except that the IP address is 10.1.1.8.
After the application restarts, the appliance contacts the Grid Master and joins the Grid as Node 2, completing the HA member configuration for Site 1.

Site 2– Single Grid Member

Make a console connection to the appliance that you want to make Node 1 in the HA pair at Site 1, and use the set network command to configure its basic network and Grid settings. Use the following data:

...

The Grid setup is complete.

Anchor
Import DHCP Data Import DHCP Data

Anchor
bookmark660 bookmark660

Import DHCP Data

The Data Import Wizard is a software tool that you can download from the Infoblox Support site to your management system. With it, you can import data from legacy DHCP and DNS servers to NIOS appliances. In this example, you use it to import both DHCP and DNS data to the Grid Master at 10.0.1.10, which then uses the database replication mechanism to send the imported data to other Grid members. In the wizard, you also specify which Grid members serve the imported data. The wizard supports various types of DHCP formats, such as the following:

• ISC DHCP
• Lucent VitalQIP
• Microsoft
• Nortel NetID
• CSV (comma-separated values); you can also import IPAM data in CSV format In this example, all the DHCP data is in standard ISC DHCP format.

Anchor
bookmark661 bookmark661

Importing DHCP Data for HQ and Site 2

1. Save the DHCP configuration file from your legacy DHCP server at 10.0.2.20 to a local directory.
2. Visit https://support.infoblox.com, log in with your support account, and download the Data Import Wizard. The Data Import Wizard application downloads to a container within a Java sandbox on your management system and immediately launches, displaying the Welcome page.
3. After reading the information in the left panel, click Next.
4. Select Import to Infoblox Appliance, enter the following, and then click Next:
   • Hostname or IP address: 10.0.1.10
   • Username: admin
   • Password: 1n85w2IF
5. Select the following, and then click Next:
   • What kind of data would you like to import? DHCP/IPAM
   • Which legacy system are you importing from? ISC DHCP
   • Which appliance will be serving this data? 10.0.2.10
6. Type the path and file name of the DHCP configuration file saved from the legacy server, and then click Next.
   or
   Click Browse, navigate to the file, select it, click Open, and then click Next.
7. In the Global DHCP Configuration table, double-click the Value cell for the domain-name-servers row, and change the IP addresses to 10.0.2.10.
8. When satisfied with the data, click Import.
   You can view the status of the importation process and a summary report in the Data Import Wizard Log.
9. To enable DDNS updates, log in to the Grid Master, from the Data Management tab, select the DHCP tab, expand the Toolbar and click Grid DHCP Properties.
10. In the DDNS -> Basic tab of the Grid DHCP Properties editor, select Enable DDNS Updates.
11. Save the configuration and click Restart if it appears at the top of the screen.
12. To check the imported DHCP configuration file, from the Data Management tab, select the DHCP tab, -> Members tab -> 10.0.2.10 -check box. Expand the Toolbar and click View DHCP Configuration.
13. In the DHCP configuration file, check that all the imported subnets are present, and navigate to the beginning of the file and check that you see the ddns-updates on statement. (If you see ddns-updates off, enable DDNS updates for the Grid as explained in steps 9-12.)

Importing DHCP Data for Site 1

1. Repeat the steps in Importing DHCP Data for HQ and Site 2, saving the DHCP configuration file from your legacy DHCP server at 10.1.1.20, and importing it to the Grid Master at 10.0.1.10 for the member with IP address 10.1.1.10 to serve.
2. Check the imported DHCP configuration file by logging in to the Grid Master and from the Data Management tab, select the DHCP tab -> Members tab -> 10.1.1.10 -check box. Expand the Toolbar and click View DHCP Configuration.

Importing DHCP Data for Site 3

1. Repeat the steps in Importing DHCP Data for HQ and Site 2, saving the DHCP configuration file from your legacy DHCP server at 10.1.1.20, and importing it to the Grid Master at 10.0.1.10 for the member with IP address 10.3.1.10 to serve.
2. After the importation process completes, check the imported DHCP configuration file by logging in to the Grid Master and from the Data Management tab, select the DHCP tab -> Members tab -> 10.3.1.10 -check box. Expand the Toolbar and click View DHCP Configuration.

Anchor
Import DNS Data Import DNS Data

Anchor
bookmark662 bookmark662

Import DNS Data

Using the Infoblox Data Import Wizard, import DNS data from the legacy hidden primary server at 10.0.1.5 to the new hidden primary server at 10.0.1.10 (the Grid Master). There are three phases to this task:

...

Legacy Server

1. Log in to the legacy name server at 10.0.1.5 and save the named.conf file, which contains all the DNS settings that you want to import into the Infoblox name server, to a local directory on your management system.
2. On the legacy server, enable zone transfers to the NIOS appliance.

Infoblox Grid Master – DDNS Updates

1. Log in to the Grid Master at 10.0.1.10, and from the Data Management tab, select the DNS tab -> Members tab -> 10.0.1.10 check box and select the Edit icon.
2. In the Member DNS Configuration editor, select the Updates tab -> Basic tab and enter the following:
   • Select Override.
   • Allow updates from: Click the Add icon and select IPv4 Address. Enter 10.0.2.10 in the Name field of the new row.
3. Click the Add icon again and add 10.1.1.10 and 10.2.1.10 as IP addresses from which you allow DDNS updates.
4. Save the configuration and click Restart if it appears at the top of the screen.

...

Note: When all DNS servers are members in the same Grid, the members use database replication to synchronize all their data—including DNS zone data. You can change the default behavior so that Grid members use zone transfers instead. In this example, Grid members use database replication.

...

Infoblox Grid Master – Name Server Groups

1. From the Data Management tab, select the DNS tab -> Name Server Groups tab.
2. Click the Add icon to open the Add Name Server Group wizard.
3. Enter the following:
   • Name Server Group Name: HQ-Group
4. Click the Add icon and add the following:
   • Grid Primary: ns1.corpxyz.com; Stealth: Select this check box.
   • Grid Secondary: ns2.corpxyz.com; Grid replication (recommended): Select this check box.
5. Click Save & New.
6. Repeat steps 2 to 4 to create another group. Name it Site1-Group, and use ns1.corpxyz.com as the hidden primary server, ns3.site1.corpxyz.com as a secondary server, and Grid replication for zone updates.
7. Repeat steps 2 to 4 to create another group. Name it Site2-Group, and use ns1.corpxyz.com as the hidden primary server, ns4.site2.corpxyz.com as a secondary server, and Grid replication for zone updates.

Anchor
Using the Wizard Using the Wizard

Anchor
bookmark664 bookmark664

Using the Wizard

While progressing through the Data Import Wizard, you must define the source, destination, and type of DNS data that you want to import. You then make some simple modifications to the data and import it.

Defining the Source, Destination, and Type of DNS Data

1. Launch the Data Import Wizard.
2. After reading the information in the left panel of the welcome page, click Next.
3. Select Import to Infoblox Appliance, enter the following, and then click Next:
   • Hostname or IP address: 10.0.1.10
   • Username: admin
   • Password: 1n85w2IF
     The Data Import Wizard Log opens in a separate window behind the wizard. Leave it open while you continue.
4. Select the following, and then click Next:
   • What kind of data would you like to import? DNS
   • Which legacy system are you importing from? BIND 9
   • Which appliance will be serving this data? 10.0.1.10
5. Select the following, and then click Next:
   • What BIND 9 DNS configuration file would you like to use? Click Browse, navigate to the named.conf file you saved from the legacy server, select it, and then click Open.
   • What type of BIND 9 DNS data do you want to import? DNS zone information and DNS record data
   • Where is the BIND 9 DNS record data? Zone transfer(s) from a DNS server; 10.0.1.5

...

1. In the Global DNS Configuration table, select all rows by clicking the top row and then SHIFT+clicking the bottom row.
2. Right-click the selected rows to display the Set Import Options dialog box, select Do not import, and then click Apply.
3. In the DNS Zones table, clear the Import check box for the default view.
4. Select corpxyz.com, lab.corpxyz.com and all the corresponding reverse-mapping zones.
   

   ---

   Tip: You can use SHIFT+click to select multiple contiguous rows and CTRL+click to select multiple noncontiguous rows.
   

   ---

5. Right-click the selected rows, and then select Set Import Options.

6. Anchor
   bookmark665 bookmark665

   In the Set Import Options dialog box, enter the following, and then click Apply:
   • Set Zone Type: No change
   • Set Import Option: No change
   • Set View: default
   • Set Member: HQ-Group master
7. Select site1.corpxyz.com and all the reverse-mapping zones with 1 in the second octet in the zone name (1.1.10.in-addr.arpa, 2.1.10.in-addr.arpa, 3.1.10.in-addr.arpa, and so on).
8. Right-click the selected rows, and select Set Import Options.
9. In the Set Import Options dialog box, make the same selections as in Step 6, but choose Site1-Group master from the Set Member drop-down list.
10. Similarly, select site2.corpxyz.com and all the reverse-mapping zones with 2in the second octet in the zone name.
11. Right-click the selected rows, and select Set Import Options.
12. In the Set Import Options dialog box, make the same selections as in Step 6, but choose Site2-Group master from the Set Member drop-down list.

Importing DNS Data

1. Click Import.
   The wizard imports the global DNS parameters and zone-specific configuration settings from the named.conf file and performs a zone transfer of the data from the legacy server.
2. Use the Data Import Wizard Log to monitor progress and review results afterward.
   The log lists all the zones that the wizard imports and concludes with a total of all the successfully and unsuccessfully imported zones.
   

   ---

   Note: If the wizard is unable to import a zone, an error message with an explanation appears in the log.
   

   ---

3. To close the Data Import Wizard, click Exit. This closes the Data Import Wizard Log as well.

Anchor
After Using the Wizard After Using the Wizard

Anchor
bookmark666 bookmark666

After Using the Wizard

After you import data, you must restart services on the Grid Master and delete the A records for the legacy servers from the corpxyz.com zone. You can also confirm that the imported data is correct and complete by checking the DNS configuration and the forward- and reverse-mapping zones.

...

 …
allow-update { key DHCP_UPDATER; 10.0.2.10; 10.1.1.10; 10.2.1.10; };
…
};

Anchor
bookmark667 bookmark667

Enable DHCP and Switch Service to the Grid

Finally, you must enable DHCP service on the three Grid members at 10.0.2.10, 10.1.1.10, and 10.2.1.10, and switch DNS and DHCP service from the legacy DNS and DHCP servers to them.

...