Page Comparison

...

• • • UseAlternateSNIHostname: If the SNI name is different from what is configured in the address field, select this check box and enter the required hostname by which an HTTPS health monitor should connect to the server.

  • Health Monitors: Define health monitors for the DTC server:

    1. Click the Add icon. A new row appears in the table.

    2. In Health Monitor, select the monitor type: icmp, http, https, sip, pdp, or snmp.

    3. In Domain Name or IP Address, type either the FQDN or the IP address to monitor.

    4. If required, add more health monitors for the server as described above. You can add up to ten health monitors per server.
       In Health Monitors from Pools, you can see other health monitors assigned to the pools that the server belongs to. The availability requirement for the pools must be set to either “All” or “Any” for you to be able to add server-specific health monitors. For information, see Configuring DNS Traffic Control Pools.

    5. Save the configuration.

  • Extensible Attributes: Add and delete extensible attributes that are associated with the server. You can also modify the values of extensible attributes. For information, see Using Extensible Attributes.

...