...
- Log in to the Infoblox CLI. After executing the reset all command, you can log in to the TOE only by using the default superuser admin name admin and password infoblox.
- Type the following command:
set cc_mode
For more information about the commands mentioned above, refer to the /wiki/spaces/NCG8/pages/22937962. The TOE reboots and goes through boot time self tests. If the test fails, the TOE goes into a loop and displays an error message on the serial console and the LCD. Otherwise, it displays the Login prompt after the self tests.
...
Note: You cannot enable the Common Criteria mode when the FIPS mode is enabled and vice versa. However, Common Criteria mode is a subset of the FIPS mode. When you enable the FIPS mode in your device, it enables both FIPS and CC mode. For more information about the FIPS mode. , see Appendix D Guidance Documentation Supplement for Federal Information Processing Standard.
...
To clear Common Criteria mode on an appliance, log in to the Infoblox CLI and execute the command: reset all.
...