Content Comparison

...

• Globally across the entire NetMRI deployment. For more information, see Configuring a Global Discovery Blackout or Change Blackout.
• Discovery IP ranges. For more information, see Configuring Discovery Ranges.
• Strategic individual devices. For more information, see Creating Blackouts for Individual Devices.
• Device Groups. For more information, see Creating Device Groups.

...

Configuring a Global Discovery Blackout or Change Blackout

Scroll bookmark
bookmarkId Bookmark_Global_Blackouts

You can separately configure discovery blackouts and change blackouts. No dependencies exist between blackout types. You may configure either type without defining new settings for the other type. At the Global level, discovery blackouts and change blackouts apply across all network views, discovery ranges, device groups, and devices unless otherwise disabled at the range or device group level.

Complete the following:

1. Choose Settings icon –> Setup –> Collection and Groups.
2. On the Global page (which appears by default), check the Enable Discovery Blackout check box and click its Scheduling icon. The Discovery Blackout Scheduling gadgets appear.
   • In the Recurrence Pattern drop-down, choose how often you want to execute the blackout period. You can select Once, Daily, Weekly, or Monthly.
   • If you choose Once, complete the following:
     • Choose an Execution Time from the drop-down list.
     • Enter the date of the blackout, in the Day_of_ field.
     • Specify the Duration: 10 or more Minutes, Hours, or Days.
   • If you choose Daily, click either Every Day or Every Weekday.
     
     • Choose an Execution Time from the drop-down list.
     • Specify the Duration: 10 or more Minutes, Hours, or Days.
   • If you choose Weekly, complete the following:
     • Choose an Execution Time from the drop-down list.
     • Check the check boxes for one or more days from Sunday through Saturday.
     • Specify the Duration: 10 or more Minutes, Hours, or Days.
   • If you choose Monthly, complete the following:
     • Choose an Execution Time from the drop-down list.
     • Day __ of every __ month(s): Specify for the discovery blackout to be executed on day-of-month X of every Y month. Month numbering starts with January. You can see some examples below.
       Day 5 of every 1 month(s): means the blackout is executed on the 5th of the current and each next month.
       Day 5 of every 2 month(s): means the blackout is executed on the 5th of January, March, May, July, and so on.
     • Specify the Duration: 10 or more Minutes, Hours, or Days.
3. If necessary, select the Enable Change Blackout check box and click its Scheduling icon. The Discovery Blackout Scheduling gadgets appear. Follow the steps above to define the change blackout schedule.
4. Click Save to save your changes.

...

NetMRI allows you to collect and manage data from SDN and SD-WAN environments. Currently, you can discover Cisco ACI and Cisco Meraki.

You can do the following in Settings icon –> To do so, go to Settings icon –> Setup –> Discovery Settings –> SDN. You can do the following on this tab:

• New: Add a new Cisco APIC or Cisco Meraki configuration. See Adding and Configuring Cisco ACI Discovery and Adding and Configuring Cisco Meraki Discovery.
• Edit: Modify information about a selected configuration.
• Delete: Remove a selected configuration from the list.
• Import: Import a CSV file containing Cisco ACI or Cisco Meraki information. For information about syntax formats, see Discovery Settings Import Formats.
• Show/Hide Credentials: Display or hide the user name and password credentials of added configurations.
• Discover Now: Start the discovery process immediately for a selected configuration.
• (For Operations Center only) Filter by Collector: 
• Search: 

You can also define general SDN and SD-WAN settings as described in Configuring SDN and SD-WAN Polling Settings.

...

1. Make sure that you enabled SDN and SD-WAN polling in Settings icon –> Setup –> SDN/SD-WAN Polling. For more information, see Configuring SDN and SD-WAN Polling Settings.
2. Choose Settings icon –> Setup –> Discovery Settings –> SDN.
3. Click New.
4.  In SDN Type, select Cisco ACI.
5. Complete the following:
   
   • Fabric Name: Specify a short and unique name for the current Cisco ACI configuration.
   • Addresses: Click Add and enter the hostname or IP address of the Cisco APIC controller. If your fabric includes more than one controller, click Add again to add more addresses.
   • Network View: Select the network view to identify the corresponding network interface for connectivity with the Cisco ACI. Also, this network view will be assigned to discover devices from this ACI.
   • Protocol: Select HTTP or HTTPS.
     If you select HTTPS, you must use a Root CA or Intermediate CA certificate to allow communication with the Cisco APIC as described below. 
     If your ACI fabric includes multiple controllers, use a combined PEM certificate. To do so, copy the ASCII data from all of the certificates into a single file.
   • CA Certificate: Perform one of the following:
     • Select a previously imported CA certificate. To learn how to import a CA certificate in NetMRI, see Installing CA Certificate.
     • Click Import CA Certificate and select a CA certificate directly from your machine.
       For how to prepare a CA certificate, see About CA Certificates for Cisco APIC. The APIC controller address must match either the certificate subject or one of subject alternative names.
   • Username: The login name for the Cisco ACI.
   • Password: The login password.
   • Use Global Proxy Settings: Select if you want to use a Proxy server for connectivity to or from with the Cisco ACI. For more information, see Configuring Proxy Settings for SDN Discovery.
6. Click Test Connection to check if the fabric is reachable and the provided credentials are correct. The connection test results are also written to the syslog.
7. Click Add or Add & Discover.

...

1. Make sure that you enable SDN and SD-WAN polling in Settings icon –> Setup –> SDN/SD-WAN Polling. For more information, see Configuring SDN and SD-WAN Polling Settings.
2. Choose Settings icon –> Setup –> Discovery Settings –> SDN.
3. Click New.
4. In SDN Type, select Cisco Meraki.
5. Complete the following:
   
   • Config Name: Specify a short and unique name for the current Cisco Meraki configuration.
   • Network Interface: Select the interface that will be used to access the device. As Cisco Meraki infrastructure may have overlapping IP addresses in different network views, you should explicitly specify a network interface exposed to the internet.
   • Protocol: HTTPS by default.
   • Address: Enter the hostname or IP address of the Cisco Meraki Dashboard API. By default it is api.meraki.com.
   • API Key: Access key required to use Cisco APIs.
   • Use Global Proxy Settings: Select if you want to use a Proxy server for connectivity to or from with the Cisco Meraki device. For more information, see Configuring Proxy Settings for SDN Discovery.
6. Click Test Connection to check if the device is reachable and the provided credentials are correct. The connection test results are also written to the syslog.
7. Click Add or Add & Discover.

...

1. Choose the Settings icon –> Setup –> Proxy Settings.
2. In the Proxy For list, select a collector .
3. Select Use Proxy Server.
4. Complete the following:
   
   • Name or IP Address: An FQDN or IP address of the Proxy.
   • Port: The port number of the Proxy.
   • Username: The username that NetMRI will use to log in to the Proxy.
   • Password: The password that NetMRI will use to log in to the Proxy.
5. Click Save.

...