...
In the Cloud Services Portal, go to Manage > Routing > Static Routes.
Select an existing edge, and click Edit.
On the Edit Static Routes page, click Add and specify do the following:
PREFIX: Specify a valid IP prefix, such as 10.1.1.0/24. This is the prefix of the IP addresses you defined for this route. For example, if you want to permit or deny traffic to 10.0.0.0/8, enter 10.0.0.0/8 here.
METRIC: Specify an unsigned integer from 1 to 10. Static routes are prioritized by metric values. The lower the metric value, the higher the precedence.
NEXT HOP: Specify an IP address, such as 10.1.1.1.
Click Save & Close.
...