In addition to the browser-based interface accessible via HTTP (port 80) and HTTPS (port 443), NetMRI supports a command line interface accessible via SSH (port 22). The Administrative Shell accepts a variety of commands that are useful for troubleshooting and maintenance.
...
Anchor | ||||
---|---|---|---|---|
|
Use this command to shut down NetMRI, then shut down the server, and then power off.
Anchor | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
...
Note |
---|
The NetMRI NT-1400 appliance is licensed as standalone even if the OC license is applied. For information about the NetMRI NT-1400 appliance, see Operations Center Appliances and Requirements. |
Note |
---|
For the Customer Name field, use only US-ASCII symbols. |
Example 1 Sample output when you continue to use an existing license
...
system
resets NetMRI to the factory default state, erasing all network database information, network database archive files, custom issue help files, ACL settings, user accounts, etc. After areset system
, reconfigure NetMRI using instructions in the Infoblox Deployment Guide for NetMRI and Operations Center.reset
admin
resets the administrator password to admin.
...
The command prompts for further information before executing (if only one network view exists in the NetMRI appliance, you will not be prompted to enter that value):
SA4-17> snmpwalk
Enter SNMP hostname or IP address []: 172.19.4.192
Enter Network View []: MGMT
Enter SNMP version (1, 2c, 3) [2c]: 3
Enter SNMP Username [ ]: aes_username
SNMP Authentication [no]: yes
Enter SNMP Authentication Passphrase [ ]: my_passwd
Enter SNMP Authentication Protocol [MD5]: sha
SNMP Privacy [no]: yes
Enter SNMP Privacy Passphrase [ ]: my_aes_passwd
Enter SNMP Privacy Protocol [DES]: aes-256
Enter Root OID to start walk [system]:
Use legacy snmpwalk tool [n]:
+++ Executing snmpwalk ...
#######################################################################
# Generated by NetMRI Administrator SNMP Walk
...
# StartTime: Mon Aug302:01:06 PDT 2020
#######################################################################
sysDescr.0 = DisplayString : Linux stsitou-deb10 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64
sysObjectID.0 = ObjectIdentifier : 1.3.6.1.4.1.8072.3.2.10 (Net-SNMP Net-SNMP)
sysUpTime.0 = TimeTicks : 40923950
sysContact.0 = DisplayString : Me <me@
example.org
>
sysNamesys
Name
.0 = DisplayString : stsitou-deb10
sysLocation.0 = DisplayString : Sitting on the Dock of the Bay
sysServices.0 = Integer32 : 4
sysORLastChange.0 = TimeStamp : 0
...
sysORUpTime.10 = TimeStamp : 0
#######################################################################
# EndTime: Mon Aug 3 02:01:06 PDT 2020
#######################################################################
+++ Results stored in snmpwalk-172-19-4-192.txt
...