In the TE-906 series, TE-906 is the base model upon which you can install the other appliances in the TE-906 series. Your TE-906 appliance comes configured out-of-the-box with a set of licenses. However, these licenses are temporary and will last for 60 days.

You can then run the set license CLI command to install subscription licenses. When you run the set license CLI command, you will be prompted to enter a license string. Contact Infoblox Support to obtain the license string and to go through the configuration process.

...

The figure below depicts the list of licenses displayed and the appliances that support these licenses. The appliances vary depending on the base model that you have purchased. The figure below represents the TE-906 series of appliances.

...

The TE-906 series of appliances is intended to replace the TE-815 and TE-825 805 appliances.

Key Features

Key features of the TE-906 series of appliances include:

• Up to 50% 30% increase in DNS QPS performance compared to TE-815 and TE-825.

• Up to 50% 30% increase in DHCP LPS performance compared to TE-815 and TE-825.

• The TE-906 series of appliances run on NIOS 9.0.1 and later.

...

If you are a NIOS 9.0 customer who has upgraded to NIOS 9.0.1, you can purchase the TE-906 appliance and continue using the features supported by the appliances above without having to buy a new subscription license. NIOS has the ability to compare the existing licenses with the new ones that will be applied, validate them, and then report whether the licenses are valid or not. You can buy a new license only after your existing license expires. However, you need a new license key. Contact Infoblox Support to obtain the new license key.

Supported Software

The following table lists the software supported by the various appliances in the TE-906 series.

...