| Note |
|---|
Note Before changing the power supply, make sure that it is securely cabled. An apparently failed power supply may simply be improperly connected to its power source. |
...
Removing an Infoblox TE-2306 AC Power Supply
| Drawio | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Disconnect the AC power cable from the power outlet.
Turn the thumbscrew counter-clockwise to release the power supply.
Gently press the catch-release lever toward the thumbscrew, grip the power supply handle, and pull the power supply unit out of the chassis as illustrated in the figure Removing an Infoblox TE-2306 AC Power Supply.
Place the replacement power supply into the bay and push it forward until it is fully seated in the chassis. The catch-release lever will gently click into place.
Reconnect the power cable.
If the power supply is fully seated, powered on, and operating properly, the LED glows steady greenblue.