...
1. Log in to the admin shell.
2. Enter At the command prompt, enter configure tunserver.
3. When prompted to enter the reference system serial number or return to skip, press Enter.
...
- Log in to the admin shell on the Operations Center Controller.
- At the command prompt, enter
configure tunserver. - When prompted to enter the reference system serial number or return to skip, type the serial number of the NetMRI reference system and then press Enter. In each prompt, defaults are shown in square brackets [ ]. To accept the default, simply press Enter.
- When asked if you want prompted to use these settings, enter y.
- When prompted to restart the Controller, enter y. The complete package of scripts, policies and user data is downloaded by the Operations Center. You install the data in the following step.
...
- Log in to the admin shell on the reference system.
- At the command prompt, enter
register. - When prompted to register this system, enter y.
4. To define restore settings on the Controller and install the uploaded reference data, do the following:
- If needed, log in to the admin shell on the Controller.
- At the command prompt, enter
restore-settings. - When asked if you want prompted to continue with import, enter y. This installs the reference data on the Controller.
- When prompted to restart the Controller, enter y.
5. . To re-register the reference unit with the Controller, do the following:
- If needed, log in to the admin shell on the reference system.
- At the command prompt, enter
register - When prompted to register the system, enter y. The Collector restarts. After restarting, the instance will be a Collector in the Operations Center system.
As part of the registration process, the admin password on each Collector synchronizes with the password on the Operations Center Controller. After the registration is complete, the admin password for the Collector may be different than the password you initially used to log in to the admin shell on that instance.
After registration, the NetMRI GUI is not available on the reference NetMRI unit. All the access to the unit must be through the Controller.