| Note | ||
|---|---|---|
| ||
The Setup Wizard is run only on the Operations Center central node. The Collectors should be registered to the central OC node before running the Setup Wizard. Consult the topics in XXX for more information. |
...
| Note | ||
|---|---|---|
| ||
This step is present only during the initial NetMRI setup. It does not appear after NetMRI is successfully configured and the wizard subsequently accessed via Settings icon > Setup > Setup Wizard. Subsequent license installations can be carried out by going to the Settings icon > Setup > Settings Summary and clicking the Install link above License Configuration. |
...
- To add an item, click New, enter the new values, select the discovery mode, and then click Add.
- To edit an item, select an entry and click Edit. Change the value in the Network field above the table, including the subnet mask if necessary (the mask value is a drop-down menu), and then click Save.
- To delete an item, select an entry, click Delete, then confirm the deletion.
- To import discovery setting data, click Import. In the dialog, click Browse..., select the CSV file, and then click Import.
...
- To add an item, click New, enter the new IP address in the IP Address field (subnet is not necessary), select the discovery mode, and then click Add.
- To edit an item, select an entry, click Edit, change the value in the IP Address field above the table or change the discovery mode, and then click Save.
- To delete an item, select an entry, click Delete, and then confirm the deletion.
- To import discovery setting data, click Import, click Browse... in the dialog box, select the CSV file, and then click Import. For more information, see Discovery Import Formats.
2. Click Next.
| Anchor | ||||
|---|---|---|---|---|
|
...
- To add an item, click New, enter the values for the Priority, Password Type (User or Enable), Username, and Password fields, and then click Add.
- To edit an item, select the item, click Edit, make the necessary changes, and then click Save.
- To test an item, select the item, click Test, select the hostname or IP, and then click Start in the dialog box.
- To delete an item, select the item, click Delete, and then confirm the deletion.
- To import credential data, click Import, click Browse... in the dialogue box, select the CSV file, and then click Import. For more information, see Discovery Import Formats.
2. Click Next.
For more information about credential definitions and NetMRI, see the topic Adding and Editing Credentials and its subsections in the NetMRI online Help.
...
NetMRI first uses the manually entered community strings, in priority order, then the default community strings are tried in priority order if the Use Vendor Default Community Strings option is enabled on the following page: Settings icon > Setup > Collectors and Groups > Global tab > Network Polling panel. Here, you disable the use of the vendor default community strings for the determination of which strings NetMRI can use. Do this for installations having tight security setups with all vendor defaults removed from the network. This option does not prevent the vendor default from running.
...
- To add an item, click New, fill in the Priority and Community fields above the table, and then click Add.
To edit an item, select the item, click Edit, make the necessary changes, and then click Save.
- To test an item, select the item, click Test, select the Hostname or IP in the dialog box, and then click Start.
- To delete an item, select the item, click Delete, then confirm the deletion.
- To import credential data, click Import, click Browse... in in the dialog box, select the CSV file, and then click Import. For more information, see Discovery Import Formats.
2. Click Next.
| Anchor | ||||
|---|---|---|---|---|
|
...
- To add an item, click New, fill in the Priority and Community fields above the table along with the required Authentication and Privacy protocols and passwords, and then click Add.
- To edit an item, select the item, click Edit, make the necessary changes, and then click Save.
- To test an item, select the item, and then click Test, select the Hostname or IP, and then click Start.
- To delete an item, select the item, click Delete, and then confirm the deletion.
- To import credential data, click Import, click Browse... Browse in the dialog box and select the CSV file, and then click Import. For more information, see Discovery Import Formats.
2. Click Next.
| Anchor | ||||
|---|---|---|---|---|
|
...
- To add an item, click New, enter the IP address of the Seed Router in the corresponding field, and then click Add.
- To edit an item, select the item, click Edit, make the necessary changes, and then click Save.
- To force immediate discovery, click Discover Now.
- To delete an item, select the item, click Delete, and then confirm the deletion.
- To import discovery setting data, click Import, click Browse... in in the dialog box, select the CSV file, and then click Import. The imported file data is applied as a set of one or more Seed Routers. Ensure correct values before importing. For more information, see Discovery Import Formats.
2. Click Next.
| Anchor | ||||
|---|---|---|---|---|
|
...
1. Select desired interrogation options (descriptions are provided in the Wizard step, and in the topic). Enable any options you consider applicable necessary for your network.
2. Click Next.
...
This Wizard step defines the methods by which NetMRI obtains information such as routing tables, ARP tables, and configuration files.
Do the following:
...