...

Anchor
Admin Password Admin Password

Setup Wizard: Admin Password

Do the following:

1. Enter and confirm the password for the NetMRI administrative account. Requirements for the password are listed at the bottom of the screen.
2. Click Next.

...

Anchor
License License

Setup Wizard: License

Do the following:

1. Browse to the location of the NetMRI license file, and then select the license file. The license file ends with the .gpg extension.
2. Click Next.

...

Anchor
Welcome Welcome

Setup Wizard: Welcome

Do the following:

1. Enable or disable auto discovery.
2. Click Next.

...

Do the following:

1. Specify devices to include or exclude during discovery:
   • To add an item, click New, fill in the fields above the table, and then click Add.
   • To edit an item, select the item, click Edit, make the necessary changes in the fields above the table, and then click Save.
   • To delete an item, select the item, click Delete, and then confirm the deletion.
   • To import discovery setting data, click Import. In the dialog, click Browse to select the CSV file, and then click Import.
2. Click Next.

...

Anchor
Static IPs Static IPs

Setup Wizard: Static IPs

Do the following:

1. Enter IP addresses you want NetMRI to manage.
   • To add an item, click New, fill in the fields above the table, and then click Add.
   • To edit an item, select the item, click Edit, make the necessary changes in the fields above the table, and then click Save.
   • To delete an item, select the item, click Delete, and then confirm the deletion.
   • To import discovery setting data, click Import. In the dialog, click Browse to select the CSV file, and then click Import.
2. Click Next.

...

Do the following:

1. Enter the CLI credentials used by the devices specified in the Discovery Ranges and Static IPs steps. NetMRI will automatically determine which credentials are associated with each device.
   • To add an item, click New, fill in the fields above the table, and then click Add.
   • To edit an item, select the item, click Edit, make the necessary changes in the fields above the table, then click Save.
   • To test an item, select the item, and then click Test. In the test dialog, select the Hostname or IP, and then click Start.
   • To delete an item, select the item, click Delete, and then confirm the deletion.
   • To import credential data, click Import. In the dialog, click Browse to select the CSV file, and then click Import.
2. Click Next.

...

Anchor
SNMP v1/2 Credentials SNMP v1/2 Credentials

Setup Wizard: SNMP v1/2 Credentials

Do the following:

1. Enter the SNMP v1/2 credentials used by the devices specified in the Discovery Ranges and Static IPs steps. NetMRI will automatically determine which credentials are associated with each device.
   • To add an item, click New, fill in the fields above the table, and then click Add.
   • To edit an item, select the item, click Edit, make the necessary changes in the fields above the table, and then click Save.
   • To test an item, select the item, and then click Test. In the test dialog, select the Hostname or IP, and then click Start.
   • To delete an item, select the item, click Delete, and then confirm the deletion.
   • To import credential data, click Import. In the dialog, click Browse to select the CSV file, and then click Import.
2. Click Next.

...

Anchor
SNMP v3 Credentials SNMP v3 Credentials

Setup Wizard: SNMP v3 Credentials

Do the following:

1. Enter the SNMP v3 credentials used by the devices specified in the Discovery Ranges and Static IPs steps. NetMRI will automatically determine which credentials are associated with each device.
   • To add an item, click New, fill in the fields above the table, and then click Add.
   • To edit an item, select the item, click Edit, make the necessary changes in the fields above the table, and then click Save.
   • To test an item, select the item, and then click Test. In the test dialog, select the Hostname or IP, and then click Start.
   • To delete an item, select the item, click Delete, and then confirm the deletion.
   • To import credential data, click Import. In the dialog, click Browse to select the CSV file, and then click Import.
2. Click Next.

...

Seed router values are recommended for IPv4 network discovery and are required for IPv6 network discovery.

Do the following:

1. Enter IP addresses for seed routers. 
   • To add an item, click New, fill in the fields above the table, and then click Add.
   • To edit an item, select the item, click Edit, make the necessary changes in the fields above the table, and then click Save.
   • To test an item, select the item, and then click Test. In the test dialog, select the Hostname or IP, and then click Start.
   • To delete an item, select the item, click Delete, and then confirm the deletion.
   • To import credential data, click Import. In the dialog, click Browse to select the CSV file, and then click Import.
2. Click Next.

...

Anchor
Device Type Hints Device Type Hints

Setup Wizard: Device Type Hints

Do the following:

1. Enter device type hints.
   • To add an item, click New, fill in the fields above the table, and then click Add.
   • To edit an item, select the item, click Edit, make the necessary changes in the fields above the table, and then click Save.
   • To delete an item, select the item, click Delete, and then confirm the deletion.
2. Click Next.

...

Anchor
Device Interrogation Techniques Device Interrogation Techniques

Setup Wizard: Device Interrogation Techniques

Do the following:

1. Select the desired options. Descriptions are provided in the wizard.
2. Click Next.

...

Do the following:

1. Select the desired options. Descriptions are provided in the wizard.
2. Click Next.

Anchor
Summary Summary

Setup Wizard: Summary

Do the following:

1. Review the summary.
2. For any item flagged as a possible configuration problem, click the Edit link to go directly to the corresponding step in the wizard to make changes. After making changes, return to the Summary step.
3. Click Finish.

...