...
| Note | ||
|---|---|---|
| ||
|
When you configure a Cisco ISE, you can do the following:
...
| Note | ||
|---|---|---|
| ||
Refer to Cisco ISE documentation for information about how to perform auto-registration, creating authorized groups, and approving dynamic topics. |
...
Limitation of Integrating Cisco ISE with NIOS
Integrating Cisco ISE with NIOS has the following limitationslimitation:
If the Grid Master is the subscribing member and you promote a Grid Master candidate to the Grid Master, then you have to create a client certificate for the promoted Grid Master.
Anchor ConfiguringCiscoOutboundEndpoint ConfiguringCiscoOutboundEndpoint
Configuring Cisco ISE Endpoints Using Outbound Endpoint
| ConfiguringCiscoOutboundEndpoint | |
| ConfiguringCiscoOutboundEndpoint |
You can configure the supported versions of Cisco ISE servers on the NIOS appliance. You can subscribe for identity information that you wish to collect from the Cisco ISE, such as user name, domain name, VLAN, session state, SSID, endpoint profile, and security group. You can also add extensible attributes without restricting it to specific object types, and map these extensible attributes with the Cisco ISE field types to collect additional information. Note that you can subscribe to only one Cisco ISE per member and each member can subscribe to only one Cisco ISE. You can publish ADP and RPZ notifications, DHCP and IPAM information from NIOS to Cisco ISEs based on the notification rules that you have configured. You can view the subscribed information from the IPAM tab and the IP Map panel. Make sure that you synchronize time between the managing member and Cisco ISE.
...