Content Comparison

To accommodate flexible deployment scenarios, the following guidelines provide information about the required sizes of partitions based on the number of devices and interfaces.

...

* The amount of storage required to maintain historical data using default Data Retention settings.
The standard disk size is 100 GB.

...

The Storage Capacity column of the table contains the total recommended HDD size of the VM. By default, when the NetMRI VM is first set up, the HDD is divided into smaller partitions using 80 100 GB. For more information, see Adding Additional Space to the Partition.

...

1. Upload the attached hotfix (physical-to-vm-assistance.gpg) to the physical appliance.
   

   View file
   name physical-to-vm-assistance.gpg

   
   

2. Run the script using the diag command.

3. Copy the script's output to a notepad or another suitable location. The script output provides the recommended partition sizes. When setting up the VM, you will require the recommended partition sizes.

4. Set up the VM using the latest image from NetMRI. To get the latest image, go to the Infoblox Support site at support.infoblox.com.

5. Create the additional HDD with the recommended space (based on the diag script output noted above) and attach it to the VM using NetMRI.

6. Reboot the NetMRI VM.

7. Log in to the admin CLI. The default username is “admin” and the default password is “admin”.

8. Using the provisiondisk command, expand the size of each partition in accordance with the diag script output noted above.

9. Create a database backup on the hardware appliance.

10. Restore the database from the backup to the VM appliance.