Versions Compared

Old Version 9

changes.mady.by.user Gary Leicht

Saved on

compared with

New Version 10

changes.mady.by.user Gary Leicht

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Prerequisites for Deploying BloxOne Endpoint on a Linux Client System

To install the Infoblox BloxOne Linux client, one of the following Linux versions is required:

  • Ubuntu 22.x (OS VERSION=“22.04 LTS (Jammy Jellyfish)” and above)
  • Ubuntu 20.x
  • Red Hat 8.x

Limitations

BloxOne Endpoint for Linux is not compatible with VPNs.

Info
titleImportant

Manual Installation of Tray Items 

Currently, due to the nature of the Linux Redhat’s extension handling, we ask our customers to install the tray icons enabling the extension for Gnome manually. The instructions are as follows:

1.Go to the site https://extensions.gnome.org/
2. Find the extension with the name “Tray Icons: Reloaded“.
3.  Install the extension and then enable it.
4. Now you can install BloxOne Endpoint.

Installing an Infoblox Endpoint Linux Client Application

...

  1. Download the Linux BloxOne Endpoint zip file: Navigate to the downloads page by going to Administration > Downloads, and click Download Linux Endpoint Client.



  2. Unzip the downloaded file, and run the installer.sh file. 
  3. Install BloxOne Endpoint by using the command command sudo sh ./installer.sh.
  4. Verify that BloxOne Endpoint has been installed correctly: The BloxOne Endpoint icon will appear on your desktop, and all related files will be extracted to /usr/local/b1e.
  5. To check the status of BloxOne Endpoint, click the BloxOne Endpoint icon and open the Status tab.


  6. Verify that the system tray icon is visible and the status is Protected with active network.

...

Use the following command:

...

     sudo sh uinstall.sh

Manual Installation of Tray Items 

...

.

...

/unistall.sh