Page Comparison

...

1. From the Cloud Services Portal, click Manage -> Endpoints.

2. On the Endpoints page, select the Endpoint Groups tab, and then click the Add button.
   

   Note

   title	Note

   At

   Do note that at least one BloxOne Endpoint must be added to the configuration prior to configuring and enabling protected bypass mode.
   

3. In the Bypass Mode section of the Create Endpoint Group page, complete the following:
   

   1. State: Enable protected bypass mode from its default disabled state by switching the toggle from Disabled to Enable.
   2. FQDN: The default probe domain is probe.infoblox.com. You can choose to accept the default or create your own FQDN based on your requirements. If you choose to use a custom probe domain, ensure that it can be resolved with a custom TXT record.

   3. TXT Record: You can choose to accept the default TXT record, generate a random TXT record by clicking Generate random TXT Record, or apply a custom TXT record.
      
      

      Note
      title Note
      To avoid conflict between two TXT records, Infoblox recommends that you define a custom probe domain and a custom TXT record, instead of using the defaults. Ensure that the custom probe domain can be resolved based on the information in the custom TXT record.

      
      

4. Click Save& Close to create the endpoint group or click Cancel to return to the BloxOne Endpoint Group page without enabling protected bypass mode and probing.

...