Page Comparison

...

1. From the vSphere Client, select the newly deployed NIOS virtual instance.
2. Click Inventory -> Virtual Machine -> Edit Settings.
3. In the Virtual Machine Properties dialog box, select the Hardware tab.
4. From the Hardware list, select one of the following based on the configuration of your NIOS virtual machine. For a NIOS virtual HA pair, you must configure both the LAN1 and HA ports for the virtual nodes.
   
5. Network Adapter 1: MGMT
6. Network Adapter 2: LAN1
7. Network Adapter 3: HA

Network Adapter 4: LAN2

Note

title	Note

Note: The virtual IP address becomes unreachable during failover, if the MAC Address Changes and Forged Transmits fields are disabled in the security setting of the virtual switch used in HA pairs. To avoid this scenario, you must set both the fields to Accept. By default, both the fields are set to Accept.

• Network Adapter 1: MGMT
• Network Adapter 2: LAN1
• Network Adapter 3: HA

• Network Adapter 4: LAN2

8. For each network adapter, select the network of the NIOS virtual instance from the Network Connection drop-down menu. The list includes all networks configured for virtual machines on the host as shown in the following figure. 
9. Click OK.

Virtual NIC Configuration
Image RemovedImage Added