...
| Component | Description |
|---|---|
| LCD Panel | An LCD screen that displays the installed software version and the IP address of the appliance. The LCD panel does not support data entry, and shows only basic information about the appliance. |
| On/Off Switch | A power switch to turn the power supply of the appliance on and off. The switch is hidden. Use a small blunt object, such as a paper clip, to gently push the switch. |
| USB Port | Reserved for future use. |
| Console Port | A male DB-9 serial port for a console connection to change basic configuration settings and view system functions through the CLI (command line interface). |
| MGMT Port | A 10/100/1000-Mbps gigabit Ethernet port used for appliance management. You must use the MGMT port for initial appliance setup and for primary system operation. The MGMT port may also be used for scan interface connections to managed networks. Infoblox recommends retaining the MGMT port exclusively for appliance management traffic. |
| LAN1 Port | A 10/100/1000-Mbps gigabit Ethernet port that is used for scan interface connections to managed networks. You can enable the LAN1 port and define its use through the GUI after the initial setup. For related information, see Configuring Scan Interfaces of the Network Automation Administrator's Guide, Release 6.9. |
| LAN2 Port | A 10/100/1000-Mbps gigabit Ethernet port that is used for scan interface connections to managed networks. You can enable the LAN2 port and define its use through the GUI after the initial setup. For related information, see Configuring Scan Interfaces of the Network Automation Administrator's Guide, Release 6.9. |
| UID Button | The unit identification button. When you press the UID button, the LCD panel on the front panel blinks and the UID LED on the rear panel glows blue. In a rack environment, the UID feature enables easier location of the device when moving between the front and rear of the rack. |
| Status LED | Reserved for future use. |
| Power LED | An LED that glows blue when there is power to the appliance. When it is dark, the appliance is not receiving power, even if the power cable is plugged in. Ensure that you power on the appliance through the On/Off switch using a small blunt object, such as a paper clip. |
| Alarm LED | Reserved for future use. |
...