The Infoblox 1405 Series platforms are 1-U appliances that you can efficiently mount in a standard equipment rack. For rack mounting information, see Rack Mounting Procedures.
Appliance Front Panel
The front panel components include the LCD (liquid crystal display) panel and navigation buttons, communication ports, and LEDs, as shown in Figure 1 and described in Table1. For explanations of Ethernet port LEDs, and console and Ethernet port connector pin assignments, see Ethernet Port LEDs and DB-9 Console Portand RJ-45 Port Pinouts.
Figure 1 Infoblox 1405 Series, Front View
...
Clean the chassis before affixing tamper evident FIPS labels. Apply these labels as shown in the figures below:
FIPS label
Install a sticker on the drive bay cover as shown in the picture
...
Install a sticker covering the IPMI port as shown in this picture
Ethernet Port LEDs
View the Activity and Link LEDs to see link activity and connection speeds on Ethernet ports. Figure 2 describes the status conveyed by Ethernet port LEDs through their color and illumination (steady glow or blinking).
Figure 2 Ethernet Port LEDs (inc. SFP+ interfaces where noted) 
SFP/SFP+ Interface Support
...