Versions Compared

Old Version 28

changes.mady.by.user Shirly Tsang

Saved on

compared with

New Version 29

changes.mady.by.user Sri Raghu

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Network Interface: The names (such as enp1s0 and enp2s0) of the Ethernet ports on the appliance. You can configure up to two network interfaces for the same network gateway. All network interfaces you have configured appear in the table. You cannot modify this field.

  • Interface Type: WAN or LAN, based on your deployment. You may or may not be able to change the interface type. When your hosts have multiple interfaces, the lowest metric interface will be marked as WAN and the rest of the interfaces will be marked as LAN.

  • Interface Label: The interface label defines the interface binding between the BloxOne service and the interface on which the service runs. You can add a custom label to associate the host with the interface binding. To add multiple interface labels, click Add Interface Label. Note that WAN and LAN are considered as interface labels.
    Note that if you configure VLAN on an interface, ensure that the parent network contains all the labels of the VLAN interfaces. Otherwise, queries by the DNS forwarding proxy at the VLAN interface might fail.

  • Protocol: From the drop-down menu, choose IPv4 to configure IPv4 interfaces or Dual Stack IPv4/Pv6 to configure IPv6 interfaces.

...

Info

  • Redundant Cloud Connectivity is not supported on hosts configured with HTTP Proxy.

  • Redundant Cloud Connectivity will be greyed out if it has zero or one interface enabled. It will be enabled only if it has two or more interfaces enabled.

Note

It is not recommended to use DHCP mode for LAN interfaces and service interfaces.

VLAN INTERFACES

Note

Due to an anycast limitation, there is no option to provide routing ID in the routing configuration. You will not be able to configure anycast advertising on a VLAN interface or multiple interfaces. Anycast will choose the WAN interface by default. For information, see Anycast Addressing.

...