...
Interface: The names (such as enp1s0 and enp2s0) of the Ethernet ports on the appliance. You can configure up to two network interfaces for the same network gateway. All network interfaces you have configured appear in the table. You cannot modify this field.
VLAN ID: Enter the VLAN ID here. It VLAN identification that specify the VLAN to which the Ethernet frame belongs.
Interface Type: WAN or LAN, based on your deployment. You may or may not be able to change the interface type. When your hosts have multiple interfaces, the lowest metric interface will be marked as WAN and the rest of the interfaces will be marked as LAN.
Interface Label: The interface label defines the interface binding between the BloxOne service and the interface on which the service runs. You can add a custom label to associate the host with the interface binding. To add multiple interface labels, click Add Interface Label. Note that WAN and LAN are considered as interface labels.
Note that if you configure VLAN on an interface, ensure that the parent network contains all the labels of the VLAN interfaces. Otherwise, queries by the DNS forwarding proxy at the VLAN interface might fail.Protocol: From the drop-down menu, choose IPv4 to configure IPv4 interfaces or Dual Stack IPv4/Pv6 to configure IPv6 interfaces.
...