...
For VRF-aware devices, you can change the Management IP address for the device by choosing it from the Management Address dropdown menu. The menu lists all IP addresses for the device, each shown with their associated network view and the collector by which the device was discovered. By default, the current management IP for the device is selected in the list. The listed management IPs fall within the discovery ranges of the Collector appliance or standalone appliance that manages the device. You can change the management collector for the device by selecting the IP address on the required collector. For more information, see Manually Changing Management Collector.
By choosing a different Management Address, the associated NetMRI appliance uses the scan interface on which the Management IP is defined. This feature is useful for devices that participate in multiple network views, as it enables the administrator to define which network view the device is managed through. In many cases, the Management Address list shows only a single network view such as the default Network 1. In these cases, all available addresses exist only in the single network view.
...