After you add your sync groups, you can view detailed information about them. You can also modify certain properties for an existing sync group or delete one when necessary, as described in the following sections:
| Table of Contents | ||
|---|---|---|
|
| Note |
|---|
Note
|
Viewing Amazon Route 53 Sync Groups
...
From the Grid tab, click the Amazon Cloud DNS tab.
Grid Manager displays the following information for each sync group in the Grid:
Name: The name of the sync group.
Status: Displays the current overall status of the sync group. This field can display one of the following status:
OFFLINE: No synchronization has started or no sync task has been configured.
OK: All synchronization is successful.
ERROR: One or more sync tasks failed. You can drill down to the sync task level to find out which sync task has failed. You can also check the syslog for more information about the failure.
.
WARNING: The services are functioning properly. However, there are some issues such as a sync task may have partially completed, which resulted in a warning. For more information, refer to the syslog.
Cloud DNS Credentials: Displays the Amazon account ID and AWS user name. This field is hidden by default.
Member: The name of the Grid member on which the synchronization occurs.
Disabled: Indicates whether the sync group is disabled or not. This displays Yes true if the sync group is disabled. When you disable a sync group, synchronization for all tasks in the group is disabled but the appliance keeps your configuration intact.
Comment: Information about this cloud member.
Cloud Service Provider: The cloud platform on which the server from which DNS synchronization is being done, is deployed.
| Note |
|---|
Note Route 53 does not support two records having the same Fully Qualified Domain Name(FQDN). If you encounter Uniqueness Violation error for any record, then that particular record will not be getting updated in NIOS from Route 53. You will receive a warning message in syslog and infoblox.log. However, sync jobs will continue to sync for other zones and records. |
...
Click the Add icon to add a new sync group.
Click the Action icon for a specific sync group to perform the following:
Edit: Modify certain properties for the sync group.
View sync details: Get details about the sync group in a different dialog box as described in the ViewingSyncTask Details section.
Delete: Remove the sync group from the list.
Create a quick filter to save frequently used filter criteria:
In the filter section, click Show Filter and define filter criteria for the quick filter.
Click Save and complete the configuration In the Save Quick Filter dialog box.
The appliance adds the quick filter to the quick filter drop-down list in the panel. Note that global filters are prefixed with [G], local filters with [L], and system filters with [S].
Use filters and the Go to function to narrow down the list. With the autocomplete feature, you can just enter the first few characters of an object name in the Go to field and select the object from the possible matches.
Sort the data in ascending and descending order by column.
Print or export the data in this tab.
...
From the Grid tab, click the Amazon Cloud DNS tab.
Click the Action icon next to the selected sync group, and then select View sync details from the menu.
The Sync Group Details window displays the following information for the selected sync group:
Sync Group Name: The name of the selected sync group.
In the SYNC TASKS TABLE table, the following information is displayed for each sync task:
Name: The name of the sync task.
Status: The current status of the sync task. You can hover your mouse over the status to display a tooltip that gives you more information about the status.
Disabled: Indicates whether this sync task has been disabled or not.
Zone Count: The total number of synchronized hosted zones.
Interval: Displays how often the synchronization happens for this task.
AWS Credentials: Displays the AWS user account that is used to establish the connection between the Grid member and AWS. Note that all the sync tasks you add to this sync group belong to the same AWS user account. This column is hidden by default.
Filter: Displays the zone or a list of zones that you have configured for this sync task. To specify multiple zones, use comma to separate the values. You can use wildcard characters in the filter. For example, you can enter “*abc*, ab?c.com, [a-z].com” in this field.
Last Run: The timestamp when this task was last run and synchronized with Amazon Route 53.
...
You can manually run individual sync tasks from the Sync Group Details window. Before initiating the sync task, ensure that the Cloud DNS Sync service is started for the member assigned to the sync group whose task you want to initiate. For steps, refer to see Starting and Stopping the Cloud DNS Sync Service.
From the Grid tab, click the Amazon Cloud DNS tab.
Click the Action icon next to the selected sync group, and then select View sync details from the menu.
In the Sync Group Details window, click the Action icon next to a sync task and select Run Task Now.
Synchronization is run for the selected task.
| Note |
|---|
Note:
|
Modifying Amazon Route 53 Sync Groups
...
From the Grid tab, click the Amazon Cloud DNS tab.
In the Amazon Route 53 Cloud DNS Sync Group table, click the Action icon next to the selected sync group, and then select Edit from the menu.
In On the General tab of the Amazon Route 53 Cloud DNS Sync Group Properties editor, modify the properties as described in the Configuring Amazon Route 53 Sync Groups.
Save the configuration.
Deleting Amazon Route 53 Sync Groups
...
From the Grid tab, click the Amazon Cloud DNS tab.
In the Amazon Route 53 Cloud DNS Sync Group table, select the checkbox of a sync group, and then click the Delete icon.
In the confirmation dialog, click Yes.
...
From the Data Management tab -> DNS tab -> Zones tab -> click a DNS view to view the list of zones.
Grid Manager displays all imported Route 53 zones in this panel of the zone view page.The name and comment for each Route 53 zone appear under the Name and Comment fields respectively.
The ID of the AWS account from which the zone’s data was synchronized, appears under the AWS Account ID column for each zone after a single or multi-account synchronization.
You can filter Route 53 hosted zones by the extensible attribute "DNS Source" = "AWS Route53." To filter:
Click the name of a Route 53 hosted zone to open its page.
In the filter section, click Show Filter.
To define the criteria, in the drop-down lists, choose DNS Source, the operator as equals, and then AWS Route53 in the same order.
To view detailed information about a specific Route 53 zone, select the zone checkbox, and then click the Edit icon.
In the Zone editor, select the Route 53 Cloud DNS Zone info tab.
The appliance displays Route 53 zone properties such as VPC, caller reference ID, resource record set count, name server, Route 53 ID, and delegation set ID. Note that this read-only data is not used for serving DNS.
...