...
| Note |
|---|
Note If you are upgrading a prior version of the IPAM Plug-In for Terraform to the latest version available in the Terraform portal, see Upgrading Infoblox IPAM Plug-In for Terraform for additional instructions. |
Prerequisites
Whether you intend to use the published plug-in or the customized version that you have built yourself, you must complete the following prerequisites:
...
| Plug-In Version | NIOS Version | WAPI Version | Go ClientGo LanguageLang | Terraform | ||
|---|---|---|---|---|---|---|
| 2.67.0 | NIOS 8.6.x and NIOS 9.0.x | 2.9.0 or later2.6.0 | 1.21 or later | 1.8. | 171 or later | 0.14 |
Downloading NIOS
If you are an existing customer, download the NIOS product from the Infoblox Support site. For installation instructions, refer to the specific product guide on the Infoblox NIOS Documentation or Appliances page. If you already have a licensed version of NIOS up and running, skip to section Setting Up vNIOS for IPAM Plug-In for Terraform.
...
- Go to the Infoblox Download Center.
- Navigate to the Infoblox DDI (DNS, DHCP, IPAM) section.
- Click Try it Now to download the Infoblox DDI product.
When the registration is complete, you will receive an email with the link that opens the Product Evaluation Portal. In the portal, under the Required Downloads section, download Infoblox DDI for VMware.
In the Product Evaluation Portal, you can find download links as well as instructional videos to set up vNIOS. Because the videos are based on VMware, we strongly recommend that you download the VMware version of the product.- After the download is complete, install vNIOS.
Setting Up NIOS for IPAM Plug-In for Terraform
After installing NIOS as described in the Downloading NIOS section, based on your requirement, complete the following steps to set up NIOS for the plug-in:
...