...
...
...
...
...
...
Prerequisites for Deploying
...
Infoblox Endpoint on a Linux Client System
To install the Infoblox BloxOne Infoblox Linux client, one of the following Linux versions is required:
- Ubuntu 22.x (OS VERSION=“22.04 LTS (Jammy Jellyfish)” and above)
- Ubuntu 20.x
- Red Hat 8.x
Limitations
BloxOne Endpoint Infoblox Endpoint for Linux is not compatible with VPNs.
Info | ||
---|---|---|
| ||
Manual Installation of Tray IconsCurrently, due to the nature of the Linux Redhat’s extension handling, we ask our customers to install the tray icons enabling the extension for Gnome manually. The instructions are as follows: |
Installing an Infoblox Endpoint Linux Client Application
To install Infoblox Endpoint on a Linux Client application, perform the following steps:
- Download the Linux BloxOne Linux Infoblox Endpoint zip file: Navigate to the downloads page by going to Configure > Administration > Downloads, and click Download Linux Endpoint Client.
Image: The BloxOne The Infoblox Endpoint download options available in the Administration section of the Cloud Services the Infoblox Portal. - Unzip the downloaded file.
- Install BloxOne Install Infoblox Endpoint by using the command sudo ./installer.sh.
- Verify that BloxOne that Infoblox Endpoint has been installed correctly: The BloxOne The Infoblox Endpoint icon will appear on your desktop, and all related files will be extracted to /usr/local/b1e.
- To check the status of BloxOne of Infoblox Endpoint, click the BloxOne the Infoblox Endpoint icon and open the Status tab.
Image: The BloxOne The Infoblox Endpoint startus screen. - Verify that the system tray icon is visible and the status is Protected with active network.
Downloading and
...
Viewing Infoblox Endpoint Logs
To download and view BloxOne view Infoblox Endpoint logs, click the BloxOne the Infoblox Endpoint icon, open the Troubleshoot tab, and click Download Logs.
Image: The BloxOne The Infoblox Endpoint download logs screen.
Start/Stop
...
the Infoblox Endpoint Service on a Linux Client Application
- To start the service, use the following command:
...
sudo systemctl stop b1endpointapp.service
...
Uninstalling Infoblox Endpoint from a Linux Client Application
Use the following command:
...