The NIOS-based IB-4030 or IB-4030-10GE appliance provides several commands to change settings in the system. To use these commands, you must connect through SSH or connect through the serial console port to the IB-4030 or IB-4030-10GE and login with the appropriate admin account.
The IB-4030 or IB-4030-10GE appliance supports the standard NIOS command-line interface for communicating with the device. For more information , refer to the Infoblox CLI Guidesee docs.infoblox.com, CLI section.

Supported IB-4030 and IB-4030-10GE CLI commands include the following:

...

The CLI commands listed below are frequently used on the appliance. For detailed information about the supported CLI commands, refer to the Infoblox CLI Guidemore information see docs.infoblox.com, CLI section.

set dns

The set dns command enables you to control the DNS cache. You can flush the cache of a DNS view or flush a particular entry from the cache.

...

You can view information about the SFPs on the IB-4030 or IB-4030-10GE application. To view the details:

1. From the Grid tab, select the Grid Manager tab

...

2. Click the Members tab -> member check box -> Detailed Status icon.
   You can also use this command to view the VLAN ID, tagged networks, and additional IP addresses that are configured for the network when you enable VLAN on an IB-4030 or IB-4030-10GE appliance. For more information about enabling VLAN support using CLI commands, see Infoblox DNS Firewall.