The management system is the computer from which you configure and monitor the Infoblox Network Automation appliance. You can access the appliance from the management system remotely across an Ethernet network or directly through a serial cable.
...
Note: The computer used as the management system must support a minimum screen resolution of 1280x800.
...
After completing the steps in Cabling the Appliance to a Network, you can make an HTTPS connection to the appliance and access the Infoblox Network Automation GUI using one of the supported Internet Web browsers listed in the Release Notes for the software release installed in your system.
For command-line operation, you can make a terminal console connection through an SSHv2 client. You can also access the CLI by connecting a serial cable directly from the console port of a management system to the console port on the appliance, and then using a terminal emulation program.
...
Note: If you wish to configure the Network Automation appliance for IPv6 connectivity, see the later section,
Configuring a Network Automation Appliance for IPv4 and IPv6.
...
Network Automation equally supports IPv4 and IPv6 networks, and reports and manages all devices running IPv4 and/or IPv6 protocols.