...
- Log in to the collector CLI as admin.
- Run the
reset tunclient
command:col2 (primary)> reset tunclient
Launching "show version" on "172.19.2.62"...
Notice: This operation will clear all Tunnel client
configuration and shut down the local Tunnel service.
Continue? (y/n) [n]: y
+++ Stopping OpenVPN Service ... OK
+++ Configuring OpenVPN Service ... OK
+++ Clearing Client Config ... OK
+++ Adjusting ACLs ... OK
Launching "failover tunclient reset" on "172.19.2.62"...
- Run the
configure tunclient
command and configure it with OC VIP address (Server Public Virtual Name or VIP address):col2(primary)> config tunclient
NOTICE: The inactivity timeout is being disabled temporarily while this command is run.
Launching "show version" on "172.19.2.62"...
NOTICE: The time zone on this system is US/Pacific.
This MUST match the Operation Center time zone for registration to be successful.
If the time zones are not equal, you must first use "configure server" to set
the collector time zone to match.
PLEASE NOTE: Changing the time zone WILL REQUIRE A SYSTEM REBOOT.
Do you want to continue registration? (y/n) [n]: y
+++ Configuring Tunnel Registration Settings
Registration Server/IP [e.g., example example.com]: 172.19.2.66
Registration protocol (http|https) [https]:
Registration username: admin
Registration password:
Register this system? (y/n) [y]:y
.......
This is going to take a long time (really long, about 40 + minutes)
- Repeat the above steps for each collector.
...