After you deploy a single independent appliance or HA pair, you can make an HTTPS connection to it, log in, and check its status.
Anchor |
---|
| Single Independent Appliance |
---|
| Single Independent Appliance |
---|
|
Single Independent Appliance
From the Dashboard, check the appliance status in the System Status widget. For information, see Member Status (System Status).
- If the Status icon is green, the appliance has a network connection and is operating properly.
- If the Status icon is red, there is a problem. To determine what it is, look at the system log file for this appliance by selecting the Administration tab -> Logs tab -> Syslog.
Anchor |
---|
| Independent HA Pair |
---|
| Independent HA Pair |
---|
|
Independent HA Pair
- Make an HTTPS connection to the VIP address of the HA pair, log in, and check the status of both nodes.
- From the Dashboard, check the appliance status in the SystemStatus widget. For information, see MemberStatus (System Status)5.
- If the Status icon is green, both nodes have connectivity with each other and are operating properly.
- If the Status icon is yellow, the two nodes are in the process of forming an HA pair.
- If the Status icon is red, the passive node is offline or there is a problem. To determine what it is, look at the system log file by selecting the Administration tab -> Logs tab -> Syslog. You can also gather information from the System tab -> SystemManager tab. For information, refer to the online Help.