...

• Add RIR organizations and their associated data, as described in Adding RIR Organizations.
• Add the RIR allocated addresses to NIOS and assign specific address blocks to ISP organizations, as described in Adding and Assigning RIR Networks0.
• View a list of organization objects, as described in Viewing RIR Organizations9.
• Review the reassignment information before sending the updates to RIPE, as described in Previewing Registration Updates.
• Modify RIR organizational data and attributes, as described in Modifying RIR Organizations.
• Modify RIR network data and attributes, as described in Modifying RIR Network Data1.
• Delete RIR organizations, as described in Deleting RIR Organizations0.
• Delete delegated addresses from an organization, as described in Deleting RIR Networks.

...

Anchor
Adding RIR Organizations Adding RIR Organizations

Anchor
bookmark1185 bookmark1185

Adding RIR Organizations

...

1. From the Administration tab, select the RIR tab, and then click Add -> RIPE Organization.
2. In the Add RIPE Organization wizard, complete the following:
   • Internet Registry: The default is RIPE. This is the RIR that allocates address blocks to your organization. You cannot change this.
   • Organization Name: Enter the name of the organization that holds the resources allocated by RIPE NCC. You can enter up to 256 characters. Enter the name in this format: A list of words separated by white space. A word can be made up of letters, digits, the character underscore "_", and the character hyphen "-". The first character of a word must be a letter or digit and the last character of a word must be a letter, digit or a period. For example, you can enter SPRINT REGION2.
   • Organization ID: Enter the handle or ID of the organization. You can enter up to 23 characters. Enter the ID in this format: Start with ORG- followed by two to four characters, then followed by up to five digits and a source specification. Note that the first digit cannot be "0". The source specification starts with "-" followed by the source name that contains up to nine characters in length. For example, you can enter
     ORG-CA1-RIPE or ORG-CB2-TEST .
   • Maintainer: Enter the name of the maintainer for this organization. This is required. You can enter up to 256 characters; however, note that the RIPE database has an 80 characters limit for this field. A maintainer is any registrant or person to whom the authority to update has been delegated by another registrant either directly or indirectly, and who holds an identifier that allows updates to be authenticated and authorized. Data entered here must match exactly how the maintainer appears in RIPE.
     Enter the maintainer name in this format: Use letters, digits, the character underscore "_", and the character hyphen "". The first character must be a letter, and the last character must be a letter or a digit. You cannot use the following words (they are reserved by RPSL): any, as-any, rs-any, peer, as, and, or, not, atomic, from, to, at, action, accept, announce, except, refine, networks, into, inbound, outbound. Also note the following: Names starting with certain prefixes are reserved for certain object types. For example, names starting with "as" are reserved for as set names. Names starting with "rs-" are reserved for route set names. Names starting with "rtrs-" are reserved for router set names. Names starting with "fltr-" are reserved for filter set names. Names starting with "prng-" are reserved for peering set names. Names starting with "irt-" are reserved for irt names.
   • Password: Enter the maintainer password. This is required. You can enter up to 256 characters.
   • Retype Password: Enter the same password.
   • Maintainer Email: Enter the originating or source email address of the maintainer. This is required.
   RIR Organizational Attributes: This table lists all predefined RIR attributes associated with the RIR organization. Click the Value field of an attribute in the table to enter a value. The Required field indicates whether a value for the corresponding attribute is required.
   You can add custom attributes by clicking the Add icon and select an attribute from the drop-down list. You can also delete an RIR attribute by selecting its check box and clicking the Delete icon.
   For information about the attributes and how to enter their values, see RIR Organizational Attributes

...

1. .
   

   ---

   Note: You cannot leave an optional RIR attribute value empty. If you do not have a value for an RIR attribute, you must delete it from the table. You can enter up to 256 characters for all RIR attributes.
   

   ---

2. Save the configuration. Note that you cannot schedule the creation, modification, or deletion of an RIR organization.

...

1. .

...

Anchor
Modifying RIR Organizations Modifying RIR Organizations

Anchor
bookmark1186 bookmark1186

Modifying RIR Organizations

...

1. From the Administration tab, select the RIR tab -> rir_organization check box, and click the Edit icon.
2. In the Organization editor, modify the organization information, as described in Adding RIR Organizations onpage 579. You can also reorder the list of RIR organizational attributes using the up and down arrows.
3. Save the configuration.

...

• Add RIR allocated IPv4 networks to NIOS, or assign addresses to specific organizations. For information see Adding IPv4 Networks.

• Add RIR allocated IPv6 networks to NIOS, or assign addresses to specific organizations. For information, see Adding IPv6 Networks.

• Add IPv4 network templates that are specific to RIR address allocation. For information, see About IPv4 Network Templates2.
• Add IPv6 network templates that are specific to RIR address allocation. For information, see About IPv6 Network Templates0.

You can also do the following to modify specific data about the RIR networks:

• Modify RIR allocated or assigned IPv4 networks. For information see Modifying IPv4 Networks.
• Modify RIR allocated or assigned IPv6 networks. For information see Modifying IPv6 Networks.
• Modify IPv4 network templates that are specific to RIR address allocation. For information, see Modifying IPv4 Network Templates.
• Modify IPv6 network templates that are specific to RIR address allocation. For information, see Modifying IPv6 Network Templates.

You can preview the information before the appliance submits updates to the RIPE database. To preview registration updates, click Preview RIR Submissions in the Add IPv4 Network or Add IPv6 Network wizards. For more information, see Previewing Registration Updates.
Image Removed
580NIOS Administrator Guide (Rev. A)NIOS 8.1
Managing RIR Data

...

Note: You can also add RIR networks through Task Dashboard. For information, see The Tasks Dashboard

...

.

...

After you create an RIR network container or network, you can perform the following:

...

You can view a list of IPv4 and IPv6 RIR networks in the Data Management tab -> IPAM tab or the Data Management tab -> DHCP tab -> Networks tab -> Networks section. For more information, see IPAM Home and Viewing Networks.

Anchor
Modifying RIR Network Data Modifying RIR Network Data

Anchor
bookmark1190 bookmark1190

Anchor
bookmark1191 bookmark1191

Modifying RIR Network Data

...

1. From the Data Management tab, select the IPAM tab -> network check box, and then click the Edit icon.
   or
   From the Data Management tab, select the DHCP tab -> Networks tab -> Networks section -> network check box, and then click the Edit icon.
2. In the IPv4 or IPv6 Network Container or Network editor, click the RIR Registration tab, and then complete the following to modify RIR related data for the IPv4 or IPv6 network container or network:
   • Internet Registry: Displays the RIR that allocates RIR address blocks. The default is RIPE. You cannot change this.
   • Organization ID: Displays the organization ID with which this network is associated. You cannot change this.
   • Registration Status: Displays the current registration status. This can be Registered or Not Registered.
     Registered indicates that the network has a corresponding entry in the RIPE database. Note that when you select API as the communication method, the registration status will be updated automatically after the registration update is completed. However, when you select Email as the communication method, the registration status will not be automatically updated. You can modify this by selecting the appropriate status from the drop-down list.
   • Status of last update: Displays the registration status, communication method, timestamp of the last registration update. The status can be Pending, Sent, Succeeded, or Failed. The displayed timestamp reflects the timestamp used on the Grid Master. Each time you send a registration update to create, modify, or delete a network container or network, the updated status and timestamp will be displayed here. If you have selected not to send the registration update, the previous status and timestamp are retained.
   • Registration Action: From the drop-down list, select what you want to do with the RIR network updates. If you are creating a top-level network block that has already been assigned to the organization, select None. If you are creating a child network within the allocated address block, you can select one of the following:
     • None: The appliance does not submit the updates.
     • Create: The appliance creates the network container or network for the specified organization.
     • Modify: Modifies data for this network container or network.
     • Delete: Deletes the RIR network from the organization. When you select this, you must enter a reason for deleting this entry in the Delete Reason field

...

1. • • .

...

1. • Do not update registrations: By default, the appliance sends updates to RIPE if you specify Create, Modify, or Delete as the registration action. Select this if you do not want the appliance to submit updates to the RIPE database.
   RIR Network Attributes: Modify the value of RIR network attributes by clicking the Value field of an attribute and entering a new value. You can add a new RIR network attribute by clicking the Add icon and selecting an attribute from the drop-down list. You can also select any optional attributes and click the Delete icon to delete them. For information about RIR network attributes, see RIR Network Attributes.
   You can enter up to 256 characters for all RIR network attributes, unless otherwise noted.
   Preview RIR Submissions: Click this to view the updates before the appliance submits them to the RIPE database. This button is enabled only when the registration action is Create, Modify, or Delete, and the Do not update registrations check box is not selected. For more information, see Previewing Registration Updates

...

1. .
   To schedule this task, click the Schedule icon at the top of the wizard. In the Schedule Change panel, click Later, and then specify a date, time, and time zone.
2. Save the configuration.

Anchor
Deleting RIR Networks Deleting RIR Networks

Anchor
bookmark1192 bookmark1192

Deleting RIR Networks

...