...
The top of the NetMRI screen automatically notifies you when updates are available to the software. Updates come in two forms: Major Updates and Hotfixes. NetMRI automatically installs hotfix updates.
| Note | ||
|---|---|---|
|
...
Check the Update History (Settings icon –> General Settings –> Update History) for information on all the updates that have taken place on the local NetMRI system. |
For manual installation, a NetMRI Administrator needs only to start the update process at a convenient time and provide any inputs requested. After that, the process is automatic, with no more inputs required.
...
Before attempting a software update, you should determine the current software version for your NetMRI installation. This can be done by:
...
You can do this in one of the following ways:
- Go to the Settings icon –> Setup section –> Settings Summary page, or.
- Executing Execute the show version command in the Administrative Shell.
In either case, the NetMRI Version, Serial Number and Server Name are shown, which are the key configuration information for the installation. If you have deployed multiple instances on your network, verify that you are connected to the appropriate one.
| Note | ||
|---|---|---|
|
...
All NetMRI data collection, analysis and web-interface processing are automatically disabled during the software update process. Therefore, software updates should be performed during off-hours whenever possible. Keep in mind that the appliance does most analysis processing between midnight and 3:00 am, so it is best to run the AutoUpdate process outside that time period as well. |
| Note | ||
|---|---|---|
| ||
Prior to performing an update, ensure that there is enough time for the update to complete before the NetMRI weekly maintenance starts. This avoids conflicts between the two processes. |
| Anchor | ||||
|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
...