The Infoblox TE-1606 appliance mounts into a standard 19" (48 cm) equipment rack. The appliances ship with accessory kits that contain the following: a pair of rack slide brackets and chassis slide rails, a pair of rack ears, eight (8) 10-32 screws, and eight (8) 8-32 screws. To mount the appliances to an equipment rack, you also need a #2 screwdriver with a cross-headed tip.
| Note |
|---|
NoteInfoblox |
...
offers a four-post and an adjustable rail four-post rack mounting |
...
kit. In addition, you can order a fixed kit separately if necessary. To order the fixed kit, contact Infoblox Support. |
There are three ways to rack mount the Infoblox TE-1606 appliance:
...
For a four-post rack mount, you combine the bundled pair of rack ears with a pair of chassis rack rails providing up to 600mm depth in a four-post rack. The chassis rack rail assembly is bundled with the appliance at time of purchase. This kit also is provided as a field-replaceable unit; for information see Replaceable Unit and SFP Part Numbers.
Align the mounting holes on the rack ears with the front-most mounting holes on each side of the chassis.
Attach the rack ears to each side of the chassis with two (2) 8-32 screws, as shown in the figure below.
Rack Ears and Chassis Slide Rails in Four-Post Rack Mount
...