...
| Component | Description | ||
|---|---|---|---|
| Reset Button |
| ||
| USB Ports | Reserved for future use. | ||
| LAN2 Port | You must use the LAN2 port to set up the appliance initially. A 10/100/1000-Mbps gigabit Ethernet port that connects the appliance to the network. | ||
| LAN1 Port | The LAN1 port is not being used. A 10/100/1000-Mbps gigabit Ethernet port that connects the appliance to the network. | ||
| Power/Status LEDs | Top LED = HDD status; Blinking amber = connectivity is good 3G LED: Not being used Bottom LED = Power status; solid green = power is on | ||
| On/Off Switch | A power switch to turn the power supply on and off. The switch is green when power is on; it is red when appliance is connected to power but not switched on. To power off the appliance gracefully, press the On/Off switch and release it quickly. To force the appliance to power off, press the On/Off switch and hold it down until the appliance is off. |
...
| Component | Description |
|---|---|
| HDMI and VGA Port | The port for connecting your monitoring to the B1-105 appliance. |
| COM1/COM2 Console Port | Only use COM1. A male DB-9 serial port for a console connection. Should you need to use a USB-to-Serial adapter to carry a serial connection over a USB port in a computer that lacks a 9-pin serial interface, use a properly grounded USB-to-Serial dongle to connect to the serial console port. If the dongle connects to a laptop, the laptop must be grounded properly as well. Failure to do so may result in damage to the serial console port of the Infoblox appliance. Infoblox is not responsible for such damage. |
| DC_IN | An AC to DC power input jack to which you connect the power cable of the AC to DC adaptor that ships with the appliance. Note that using an incompatible adaptor or cable, or improperly connecting the adaptor or cable may cause damage to the appliance. |
...
Pin | Signal | Direction |
1 | (not used) | |
2 | Receive | Input |
3 | Transmit | Output |
4 | DTE Ready | Output |
5 | Ground | — |
6 | DCE Ready | Input |
7 | RTS (Request to Send) | Output |
8 | CTS (Clear to Send) | Output |
9 | (not used) |
Pin | 10Base-T 100Base-T Signal | 1000Base-T Signal | T568A |
Straight-Through Wire Color | T568B |
Straight- |
Through Wire Color | ||||
1 | Transmit + | BI_DA+ | White/Green | White/Orange |
2 | Transmit - | BI_DA- | Green | Orange |
3 | Receive + | BI_DB+ | White/Orange | White/Green |
4 | (not used) | BI_DC+ | Blue | Blue |
5 | (not used) | BI_DC- | White/Blue | White/Blue |
6 | Receive - | BI_DB- | Orange | Green |
7 | (not used) | BI_DD+ | White/Brown | White/Brown |
8 | (not used) | BI_DD- | Brown | Brown |