To manage efficiently handle protocol service traffic efficiently, use utilize service instances to bind your services to specific network interfacesassociate your services with particular network interfaces.
When setting up a protocol service, you choose a NIOS-X server on which you want to run the service. You can reassign or transfer the service to another NIOS-X server after you set up the service. This feature is useful if you need to update your network infrastructure or decommission a particular server.
Use the following steps to create these protocol services: Access Authentication, Cloud VPN Connector, Data Connector, DHCP, and DNS, DNS Assured Forwarding, Edge Services Firewall, MS AD Sync, NIOS Grid Connector, Policy Routing Service, Remote Access VPN, Site to Site VPN. For other protocol services, refer to their respective documentation.
The interface binding feature is currently unavailable for the NIOS Grid Connector service. The Create <Service> wizard will guide you through the applicable steps when creating a service.
To create a supported service instance, do the following:
Log in to the Cloud Services Infoblox Portal.
Go to Manage Configure > Infrastructure Service Deployment > Services Protocol Service.
Click Create Service.
From the drop down menu, select the protocol service instance you want to create.
In the Create <Service> wizard, follow the steps in the wizard to create the service.
...