...
You can apply a new license file or modify the existing license using the license generate command. When you receive the file, save it in a location you can access from the Setup Wizard.
...
| Note |
|---|
Infoblox recommends enabling automatic discovery during the Setup Wizard. |
With the automatic discovery, NetMRI attempts to discover devices on the network using SNMP and terminal command-line discovery methods. Less configuration is required by using automatic discovery, but it may take longer to completely discover all the devices you expect to be detected and managed.
...
| Note |
|---|
You can add new IP address ranges and seed routers at any time after initial NetMRI setup. IPv4 and IPv6 are supported. For more in-depth information, see the Configuring Discovery Ranges topic. |
Discovery ranges define the scope of the network that NetMRI explores by defining CIDR address blocks, IP address ranges and IP address wildcards. NetMRI limits its network exploration to the set of ranges defined in this tab. You can also exclude values and ranges from the Discovery process and hence from monitoring by NetMRI.
...
- Specify IP addresses that you want NetMRI to manage.
- Click New, enter the new IP address in the IP Address field (subnet is not necessary), and choose the Discovery Mode. For the first network you discover, use the Include in Discovery selection.
- Ensure that the network view chosen in the Wizard step Setup Wizard: Discovery Ranges is selected from the Network View drop-down list. For example, you may use the Network 1 network view.
- Click Add.
- To edit an item, select an entry and click Edit. Change the value in the IP Address field above the table or change the Discovery Mode (by default it is set to Include in Discovery), then click Save.
- To delete an item, select an entry, click Delete, then confirm the deletion.
- To import discovery setting data, click Import. In the dialog, click Browse to select the CSV file, then click Import. See Discovery Settings Import Formats for information on import file syntax.
...
- Enter IP addresses for seed routers.
- Click New, enter the value in the Seed Router IP Address field, then click Add.
- Ensure that the network view chosen in the Wizard step Setup Wizard: Discovery Ranges is selected from the Network View drop-down list. For example, you may use the Network 1 network view.
- Click Add or Add & Discover.
- To edit an item, select the item, click Edit, change the fields above the table, then click Save.
- To force immediate discovery, click Add & Discover.
- To delete an item, select the item, click Delete, then confirm the deletion.
- To import discovery setting data, click Import. In the dialog, click Browse to select the CSV file, then click Import. See Discovery Settings Import Formats for information on import file syntax. The imported file data are applied as a set of one or more Seed Routers. Ensure that the values are correct before importing.
- Click Next.
...