In addition to using the Grid Setup Wizard or access the Join Grid dialog box to join appliances to a Grid, you can set up an appliance using the auto-provisioning feature, which allows a DHCP server to automatically assign an IP address to the appliance. You can then join the auto-provisioned appliance to the Grid.
Auto-provisioning is enabled by default for new installations of physical appliances, but it is not supported for vNIOS appliances. When you connect the appliance to the network, a lease request is automatically sent to the DHCP server. The DHCP server fingerprints the client as "Infoblox Appliance," as the DHCP client provides the unique option sequence (1,28,2,2,3,3,15,6,12) and vendor ID (INFOBLOX). The DHCP server assigns a DHCP lease and a dynamic IP address to the appliance. If the DHCP lease request fails, the default IP address (192.168.1.2) is assigned to the appliance. The DHCP client tries to send the lease request for a duration of one minute when the appliance is either in the factory default state or in the auto-configured default IP address state after a reboot. If you do not use
auto-provisioning to set up the appliance, then you can wait one minute before connecting the appliance to the network. Otherwise, the DHCP server will assign a dynamic IP address to the appliance. Note that if you have already set the IP address for the appliance through the Infoblox CLI, GUI, or API, then auto-provisioning is disabled for the appliance and the lease address is not requested. When auto-provisioning is enabled for an appliance, the DNS, DHCP, FTP, TFTP, HTTP, NTP, Captive Portal, Reporting services, as well as backup and restore are disabled for the member until a static IP address is set for the appliance. You can join a single appliance or HA pair to the Grid. After the appliance joins the Grid, the static IP address is set for the appliance.
...
Connect the appliance to a network using an Ethernet cable, connect it to a power source, and then turn on the power. For information about cabling the appliance to a network and powering the appliance, refer to the user guide or installation guide that ships with the product.
A lease request is automatically sent to the DHCP server that assigns a DHCP lease and a dynamic IP address to the appliance. The DHCP client tries to send the lease request for a duration of one minute and if the request fails, the default IP address (192.168.1.2) is assigned to the appliance.Join the appliance to the Grid Master. You can join the auto-provisioned appliance to the Grid Master using the Connect dialog box. You can also join an appliance to the Grid using the JoinGrid dialog box.
A static IP address is set and auto-provisioning is automatically disabled for the appliance after it joins the Grid.
Only the following physical platforms supports Auto-Provisioning:
IB-4015, IB-4025, TE-815, TE-825, TE-1415, TE-1425, TE-2215, TE-2225, TR-1405, TR-2205, TR-4005.
...
Log in to the Grid Master. Note that the single appliance or the HA pair must be online and the Grid Master must be able to reach the appliance.
From the Grid tab, select the Grid Manager tab -> Members tab.
Add the appliance as a Grid member. For information about adding Grid members to the Grid, see /wiki/spaces/nios84draft/pages/26151674 Adding Grid Members.
Select the Grid member that you want to join to the Grid Master, expand the Toolbar and click Connect.
The following fields are displayed in the Connect dialog box:
Host Name: The name of the member.
Configured IPv4 Address: The IPv4 address of the member.
Site: The site to which the IP address belongs. This is one of the predefined extensible attributes.
Temporary IPv4 Address: Enter the IPv4 address of the DHCP lease or click Select to select the DHCP lease.
Grid Manager displays the Lease Selector dialog box from which you can select the DHCP lease. Note that the Lease Selector displays the active DHCP leases which are fingerprinted as "Infoblox Appliance".
Click Next to retrieve the appliance information.
The Grid Master uses SSL to connect to the appliance and it gets the appliance information. Grid Manager displays the following information for the appliance:Remote Appliance Type: The appliance type.
Remote Appliance Serial Number: The serial number of the appliance.
Licenses: Grid Manager displays the Grid license and the licenses that are pre-provisioned on the member.
It displays the following information:Type: The license type.
String: The license string. If the license string is not displayed, you can enter or paste it here.
Click Connect to join the appliance to the Grid Master.
To confirm that the appliance has successfully joined the Grid, check the status in the Status column of the newly added member. (Green = The appliance has joined the Grid Master and is functioning properly; Yellow = The appliance is in the process of joining the Grid Master; Red = The appliance has not joined the Grid Master).