...

The ranges table displays each defined range, its type (CIDR, IP Range, or IP Pattern), and its use in the discovery process. Ranges excluded for discovery indicate that any network device found matching that range is excluded from discovery by the appliance. See Range Examples for more information.

Creating Discovery Ranges

Every discovery range you create must be associated with a network view. If no network views are specifically defined in your deployment, your discovery ranges will automatically be assigned to the automatically created network view Network 1. For the first discovery of the network, this network view is automatically assigned to the SCAN1 port when you set up the appliance using the configure server command.

If more than one network view exists, you can choose the network view with which the discovery range will be associated, by clicking the Network View drop-down menu. If only one network exists in NetMRI, this setting does not appear. The chosen network view must also be associated with a scan interface, otherwise, discovery does not take place. Unassigned network views that do not have an assigned scan interface or virtual scan interface appear with a caution icon (Image Removed) in discovery ranges configuration. For more details, see Configuring Network Views.

Network views can contain multiple discovery ranges. So when you create other ranges, you can assign the same network view to each. However, you can assign each discovery range to only one network view. Also, ensure that the ranges you assign to each network view make sense. Selecting the network view in an Operations Center environment also involves other details. For more information, see Defining Discovery Ranges on Operations Center Collectors.

You can define discovery ranges that will be excluded from management. This is useful for devices you may not want to manage, but want to know about for inventory purposes. End Host network segments are a good example.

To create a discovery range, complete the following:

1. Obtain or calculate the network range values. You can define a Network address (expressed as CIDR: in effect, a subnet prefix), an IP range, or an IP pattern.
2. Choose Settings icon > Setup > Discovery Settings > Ranges.
3. Click New.
4. Choose an appropriate way to specify the range: 
   • CIDR: Enter the IP Prefix value and its CIDR subnet value in the drop-down.
   • IP Range: Specify an IP range using a beginning and ending value.
   • IP Pattern: Specify a wildcard pattern for matching IP addresses.
5. For Discovery Mode, select one of the following:
   • Include in Discovery: Any device found matching that range is discovered and managed by NetMRI.
     Discovery gives the highest precedence to devices found in an Include in Discovery range, ensuring they will be the first to appear in information tables in the appliance.

• • Exclude from Discovery: Instructs NetMRI to ignore the specified values and do not discover them through any of the specified protocols. Ranges set to an Exclude from Discovery setting are simply excluded, given the lowest precedence, and will not be discovered.
  • Exclude from Management: Indicates that NetMRI discovers any device found matching that range, but NetMRI will not manage or collect data from the device. Network devices found in an Exclude from Management range are given moderate precedence and will, over time, appear in information tables applicable to unmanaged devices. End host network segments are an example.

...

For more information

...

6. Select the Enable Discovery Blackout check box and click its Scheduling icon.

7. Define your schedule as follows:

...

• Choose an Execution Time from the drop-down list.
• Specify the Duration: 10 or more Minutes, Hours, or Days.

...

,

...

• Choose an Execution Time from the drop-down list.
• Check the check boxes for one or more days from Sunday through Saturday.
• Specify the Duration: 10 or more Minutes, Hours, or Days.

...

see

...

Specify the Duration: 10 or more Minutes, Hours, or Days.

8. Select the Enable Change Blackout check box and click its Scheduling icon. Follow the instructions for the Enable Discovery Blackout setting in the previous step.

9. Click Add to place the new discovery range into the Range table.

Creating Blackouts for Individual Devices

To support discovery blackouts for individual devices, obtain the Management IP address for the device in question, and assign that IP address to a /32 or /128 discovery range. Define the discovery blackouts settings as you would for any other discovery range. This practice may be handy, for example, for strategic routers and switches that cannot incur excessive latency for transaction traffic. However, this approach means that you cannot create change blackouts for individual devicesRange Examples.