...
- From the Grid tab, select the Grid Manager tab -> Members tab.
- Click the Action icon icon (as shown below) next to the vNIOS member and select Generate Token from the list.
In the Your Permission Token dialog box, the appliance displays the token and the Expiration Date of the token. You must generate a new token for the member if the token is not used before the expiration date.
Copy this token and paste it at the CLI when you use theset token on
command to set the token and generate the token file.
...
- From the Grid tab -> Grid Manager tab, click Grid Properties -> Edit from the toolbar.
- In the Grid Properties editor, select the General tab -> Basic tab and complete the following:
- In the Token usage timeout : Enter
- field, enter the time interval (in minutes) for which the appliance sends a syslog message to alert you about the unused permission token for a pre-provisioned member. For example, if you enter 5 here, the appliance sends a syslog message every five minutes. The default is 10.
- Save the configuration.
Using CLI Commands to Join Grid Members
...