...
To configure a pool, complete the following:
From the DataManagement tab, select the DNS tab -> TrafficControl tab, and then click the arrow next to the Add icon and select Pool.
In the DTCPoolWizard, complete the following:
Name: Enter the name of the pool.
Comment: Enter additional information about the pool.
Auto Consolidated Monitors: Select this option to enable auto-managing of DNS Traffic Control Consolidated Monitors. This option locks all the DNS Traffic Control consolidated monitor settings and creates a DNS consolidated monitor for each health monitor in the pool with the following settings:
Availability – ALL
Full health communication – Yes
Listen To members - all DNS Traffic Control members that serve linked LBDN(s).
Enabling the Auto Consolidated Monitor option also helps to synchronize the health statuses of DNS Traffic Control objects in the LBDN for each DNS Traffic Control Grid member, which means if one Grid member considers that the DNS Traffic Control Server is RED, this server will be RED for each Grid member performing the health check. For information on DNS consolidated monitors, see Configuring DTC Monitors for Health Check.
For information on Limitations and Warnings of the Auto Consolidated Monitors option, see Limitations For DNS Traffic Control.Disabled: Select this to disable the pool.
...
Click Next to associate health monitors with the pool:
Health Monitors: Select the health monitor from the Available table, which you want to associate with the pool, and then click the right arrow to move the selected health monitor to the Active table. You can use SHIFT+click and CTRL+click to select multiple health monitors. To dissociate the health monitor from the pool, select it and click the left arrow to move it to the Available pane from the Active pane.
Availability Requirements: Select from the following:
All: All active monitors must report the available status for the pool to be determined as available.
Any: Any number of active monitors must report the available status for the pool to be determined as available.
At least: The minimum number of active monitors that must report the available status for the pool to be determined as available.
...
Click Next and select the preferred load balancing method:
All Available
Ratio: Dynamic (see details below in the procedure)
Global Availability
Source IP Hash
Ratio: Fixed
Round Robin
Topology (see details below in the procedure)
...
For more information, see Load Balancing Methods for DNS Traffic Control.
...
If you select Ratio: Dynamic as the preferred method, also select a dynamic ratio method from the following:
Round Trip Delay: Select this to enable load balancing based on the proximity of DTC servers determined through round trip delay. Specify the following:
Monitor: Select a pre-configured health monitor to use for monitoring the round trip delay.
SNMP: Select this to enable load balancing based on a server metric captured by an SNMP health monitor. Specify the following:
Monitor: Select a health monitor for which to track a server metric.
OID: Specify an object identifier that indicates the metric to track.
Weighing: Select to weigh DTC servers by priority or ratio.
Inverse OID value: Select this if you want to use the value of the monitored metric as inversed for convenience of determining the availability of the server.
...
If you select Topology as preferred method, also select a Topology Ruleset. Only topology rulesets with the Server destination type are displayed in the drop-down list.
...
If you select Topology as the preferred method, you can also specify the alternate method which is used to select a server from the pool if the preferred one does not return any result. The preferred and alternate methods must be different.
...
If applicable, select the alternate load balancing method.
All Available
Ratio: Dynamic
Global Availability
Source IP Hash
None
Ratio: Fixed
Round Robin
Topology
For details on each alternate method, see the description of the preferred method above.
...
Click Next to associate servers with the pool. Click the Add icon, select a server from the DTCServerSelector dialog box and click OK. You can use SHIFT+click and CTRL+click to associate multiple servers. The appliance displays the following information:
...
Server Name: The name of the DNS Traffic Control server.
Host: The host address of the server.
Ratio: You can modify the ratio value. The value must be greater than zero.
Disabled: Indicates whether the server is disabled.
Order: Displays the order of servers in the list.
To dissociate a server from the pool, select the checkbox next to the server name and click the Delete icon.
...
Click Next to define extensible attributes. For information, see Using Extensible Attributes.
...
To schedule the change, click Next or
...
Schedule for Later. In the
...
Schedule Change panel, select Now to immediately execute this task. Or, select Later to schedule this task, and then specify a date, time, and time zone.
...
Save the configuration.
Modifying DNS Traffic Control Pools
To modify a pool, complete the following:
From the DataManagement tab, select the DNS tab -> TrafficControl tab, click the Action icon next to the pool name and select Edit from the menu.
The DTCPool editor contains the following basic tabs from which you can modify data. For information about how to modify data, see Configuring DNS Traffic Control Pools above.
General: This tab displays the pool Name and Comment. You can edit the values and enable or disable the pool.
TTL: This tab displays the TTL value configured for the pool. The default value is inherited from the LBDNs which are using the pool. There can be multiple inheritance. Click Override to override the value.
Health Monitors: This tab displays health monitors that are associated with the pool. You can associate new health monitors or dissociate the health monitors that are already associated with the pool.
Load Balancing: This tab displays the load balancing methods that you have selected while configuring the pool. You can select a new preferred and alternate load balancing methods.
Pool Members: This tab displays the servers that are associated with the pool. You can add new servers or delete servers that are associated with the pool. You can also modify the ratio and order of servers.
Extensible Attributes: Add and delete extensible attributes that are associated with the pool. You can also modify the values of extensible attributes. For information,
...
...
To schedule this task, click the Schedule icon at the top of the wizard. In the ScheduleChange panel, select Later and enter a date, time, and time zone. The Schedule icon is green when there is a pending scheduled task. For information,
...
see Scheduling Tasks.
...
Save the configuration.