Obtain a tree of information from a network device using automatic SNMP GETNEXT commands. In NetMRI’s administrative shell version of the snmpwalk
command, you can specify the SNMP version, the community string, and the desired Root Object ID (OID).
...
The command prompts for further information before executing. If only one network view exists in the NetMRI appliance, you will not be prompted to enter that value.
The output is similar to the following:
SA4-17> snmpwalk
Enter SNMP hostname or IP address []: 172.19.4.192
Enter Network View []: MGMT
Enter SNMP version (1, 2c, 3) [2c]: 3
Enter SNMP Username [ ]: aes_username
SNMP Authentication [no]: yes
Enter SNMP Authentication Passphrase [ ]: my_passwd
Enter SNMP Authentication Protocol [MD5]: sha
SNMP Privacy [no]: yes
Enter SNMP Privacy Passphrase [ ]: my_aes_passwd
Enter SNMP Privacy Protocol [DES]: aes-256
Enter Root OID to start walk [system]:
Use legacy snmpwalk tool [n]:
+++ Executing snmpwalk ...
#######################################################################
# Generated by NetMRI Administrator SNMP Walk
...
# StartTime: Mon Aug302:01:06 PDT 2020
#######################################################################
sysDescr.0 = DisplayString : Linux stsitou-deb10 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64
sysObjectID.0 = ObjectIdentifier : 1.3.6.1.4.1.8072.3.2.10 (Net-SNMP Net-SNMP)
sysUpTime.0 = TimeTicks : 40923950
sysContact.0 = DisplayString : Me <me@
example.org
>
sys
Name
.0 = DisplayString : stsitou-deb10
sysLocation.0 = DisplayString : Sitting on the Dock of the Bay
sysServices.0 = Integer32 : 4
sysORLastChange.0 = TimeStamp : 0
...
sysORUpTime.10 = TimeStamp : 0
#######################################################################
# EndTime: Mon Aug 3 02:01:06 PDT 2020
#######################################################################
+++ Results stored in snmpwalk-172-19-4-192.txt
...